Wyze Vacuum not responding

[purchark]

Robot Vacuum Battery Replacement

Here are some photos showing how to replace the battery on a Wyze WVCR200S robot vacuum. Invert the vacuum and remove the main roller brush. [image] Remove the 4 Philips head screws holding the battery cover. [image] Remove the battery cover exposing the battery. [image] Lift the battery straight out being careful not to yank the wires out. [image] Disconnect the connector by squeezing the latch. [image] [image] Assembly is the reverse of disassembly. The wiring from the battery…

I have a collection of troubleshooting stuff here:

Updates to map for robot vacuum?

It will only save map updates done by a full vacuum. It won’t save for spot cleaning or if any rooms are selected (*). It also must dock pretty much on the 1st try, seen it too many times fail to save if it takes longer than normal to dock. (*) I found an odd case where it actually saved a map change after selecting a room to clean. Not sure if it has a meaningful use though. So it can happen. (2022-05-28) For large changes (a new open room) it will ask at the end if you want to save the chang…