Well my systems are a bit extreme and not for the average hobbyist / user so first I will suggest these posts. and below that I will show what I use…
As far as USB wall adapters I do not know which are best as I do not use them in my setups, you may want to review high-quality USB adapters on the internet.
These posts are very informative as to power cycling power devices: (Note the blue lettering are links to those posts, Click the Blue Lettering links to go to them)
Plan Ahead so you can Restart a stalled Wyze Camera
Adding a built-in feature to Wyze cameras
And there are plenty more remote powering solutions in this forum which you could use the “Magnifying Glass” Icon top of page to perform the searches…
_____________________________________________________________________________________________
Now I will give the info to my much more complex powering setups which most hobbyists / users likely won’t want to build.
Battery Backed-Up 14 V3 cams and Internet Communications <— Main Powering source replaces USB adapters for most of system except remote Solar powered cameras
.
.
This what I use but it is “Way Over The Top” for your needs of power cycling 
IP-P4 Professional 4-Port Remote Power Switch - Phone Control + Web Control
And I have also heavily modified mine to run on 12 volts as my system is 12 volt based for cams and internet.
Modified for 12 volt DC control IP-P4 picture below:
It allows me to control 3 banks of multiple cameras per bank and also be able to reset internet if down through landline telephone.
___________________________________________________________________________________
Solar panel AND battery for Wyze Cam 3
Note the solar setup has a WiFi interface not shown in picture that also allows me to cycle the load connected to solar controller. I pulled it out of picture as to not show it for less complexity in that post, you can see the wires hanging out of enclosure that connects to those devices.
__________________________________________________________________________________________________
Note my powering and control systems used to run older security cameras of lower resolution that were later replaced with Wyze Cams V2, Pan-Cam, and later V3’s when they came out.
The Powering and control systems have more $$$$ invested in them than the Wyze Cameras do