So I have had CamPlus Lite for a bunch of my cameras the last few years, and it’s been good. I had an issue with my Wyze floodlight where the floodlight accessory disconnected from the Wyze v3 it’s connected to, so I had to do a hard reset. After resetting it and getting the floodlight up and running again, I noticed I was not able to add the floodlight back to my CPL subscription anymore. Like on the CPL subscription page of the app, you can see the floodlight there and you can check the box off, but once you submit and go back in, the box is unchecked again. I thought this was strange and (in troubleshooting) unchecked one of my other cams, and now that camera is doing the same thing where you check it, submit and go back in and it’s unchecked. Not sure what I’m doing wrong… I feel like this is a glitch in the app. Thanks in advance for anyone that has any pointers. UPDATE: got it to work again — see below response…

UPDATE: So I submitted a ticket with Wyze last night and someone got back to me this morning (so thankful they got back so fast!). In my ticket, I asked for my CamPlus Lite subscription to be “refreshed”. They wrote back and told me they had done so, and gave me instructions to log out of my app, login and try adding those two cams back to the CPL subscription. They gave instructions to do this on the app or the website. I tried the app first, and it gave me a “error: INTERNAL_ERROR” message… so I logged in on the website… tried there… and it magically works! I suggest you contact support to have them refresh your subscription! Good luck!

It’s a known issue that got added into the Fix-it-Friday reports: [image]Fix-It Friday - April Users are unable to switch cameras from Cam Plus to Cam Plus Lite We are looking into these reports and could use some app logs to help us. Please submit a log and let me know the log number. In the Wyze app, go to Account > Wyze Support > Submit a Log. Select your device from the dropdown menu. Then fill in the description box with the date, time, and time zone of the most recent time you noticed this issue and a description of what’s happening. Make sure the Send Logs option is selected and then submit your log. When you have the log number, please post it and tag me so I can get it to the right folks.

Same issue… I picked up a new v3 cam. Got it all set up. I clicked the basic, free service during set-up (not Cam Plus free trial). Went to Account->Services, pulled up my CPL subscription, clicked to Manage Cameras. I can see the new v3 cam unchecked, so I checked it, and saved. Still not working. Go back to Manage Cameras and it is UNCHECKED. Tried multiple times and it will not stay checked. I also tried deleting the cam and re-setup. No change. At one point while troubleshooting, I tried UNchecking one of my 3 existing v2 cams. Big mistake. Now I can’t add that cam back to the CPL subscription. What the heck!? Now I only have 2 cams that actually work on CPL. The other 2 cannot be added. Seems like an obvious problem in the software somewhere. I’ve submitted a ticket # 3813202. I also submitted logs for both cameras: 1391588 and 1391591. Please provide an update when a fix can be expected. If there is some other solution that I can do, please advise. Thank you.

Can’t apply CamPlus Lite to cams that had it before?

Wyze App

carverofchoice April 21, 2024, 6:05am 2

It’s a known issue that got added into the Fix-it-Friday reports:

Topic		Replies	Views
Cam Plus Lite (free) error Cameras support , troubleshooting , iphone-ipad , cam-v3	20	944	May 21, 2024
Cam plus subscription not working Services & Integrations cam-plus	7	622	May 20, 2024
Cam Plus Lite subscription 'Active Jul 20, 2034'?! / Won't add CPL to cameras Services & Integrations cam-plus-lite	13	589	May 11, 2024
Can't add new Wyze Cam v3 to Cam Plus Lite Wyze App app , android , cam-plus	5	729	April 24, 2024
Cannot add cameras to Cam Plus Lite Services & Integrations cam-plus-lite	1	489	April 23, 2024

Can’t apply CamPlus Lite to cams that had it before?

Related topics