I have a new wyze cam v2 which i cannot get to connect to my home network. I already have three wyze cam v2;s all working fine.
When i try to setup the camera I follow the normal steps to connect the new camera using the wyze cam app. After canning the QR code it keeos timing out.
- I have tried a different micro sd
- Ensured the the home wifi is only running 2.4Ghz
- Tried using different micro usb cable
- Different usb power plugs
- Reset wyze cam by holding the button down for 20 seconds
- Ensured no ports blocking etc… iin thr router.
I extracted the logs from the router
DHCP device Disconnected: 192.168.1.155, a8:3f:a1:85:69:6b, unknown
17:39:39, 08 Apr.
LAN [DEL] ARP 192.168.1.155 with a8:3f:a1:85:69:6b from br0
17:39:39, 08 Apr.
2.4G Client disassociate from a8:3f:a1:85:69:6b (IP=192.168.1.155) RSSI=0, Rate=0Mbps
17:39:38, 08 Apr.
WHW INFO A station STA(A8:3F:A1:85:69:6B) leave WHW infrastructure
17:39:38, 08 Apr.
2.4G client Mac: A8:3F:A1:85:69:6B Deauthentications (Reason:Deauthenticated because sending station is leaving (or has left) IBSS or ESS)
17:39:30, 08 Apr.
ARP [add] br0(wl1) 192.168.1.155 a8:3f:a1:85:69:6b
17:39:25, 08 Apr.
DHCP device Connected: 192.168.1.155, a8:3f:a1:85:69:6b, unknown
17:39:25, 08 Apr.
2.4G Client associate from a8:3f:a1:85:69:6b (IP=192.168.1.155) RSSI=-44, Rate=65Mbps, host
17:39:25, 08 Apr.
LAN [ADD] ARP 192.168.1.155 with a8:3f:a1:85:69:6b from br0(wl1)
17:39:24, 08 Apr.
Receive a DHCP request
17:39:24, 08 Apr.
WHW INFO A station (SmartHub2)IF2.4G:STA(A8:3F:A1:85:69:6B)(Legacy Device) join WHW infrastructure
Appreciate if someone can help to advise.