two of my wyze cam pan v/3 are not moving I have 3 , all at different locations on different routers…I have changed nothing and all are updated…what is going on…they still monitor and record in the assigned areas, they just don’t move. I don’t use pan scan, never have..

Your issue reminds me of another recent topic where at least one user was able to get the cameras working as expected again: [image] Pan Cam V3 not panning Cameras Yes Same issue here. My Pan Cams do not PAN correctly. I try manual control and their response is unpredict…

Based on experience, 2 common reasons for this are • Not enough power; are you using the stock power adapter and USB cable? • Unstable connection; maybe someone in the neighborhood added a new router and the channel is busy? When I had this problem, I still had a stable live view, but panning fail…

don’t use way points and rebooted all non moving pan cams and still not moving, Probably this all started this about 2 months ago.. I may just completely remove and reinstall and try that. thanks

I use stock cable and power on one that is not moving, working, but not moving. The other is have extension , but stock power…However, it was not working before I went to the extension for an outdoor connection. Possible uninstall and reinstall, it still works correctly, just doesn’t follow objects…

Pan V3s have “Track Motion” set by default. Is it possible this was turned off by mistake?

according to instructions you cannot use motion dectection along with track motion. Cameras were all moving a few months ago, they still work, just don’t track..So, I don’t see this as a answer for me…but I do appreciate the information.

[image] KSgpa2020: cannot use motion dectection along with track motion That’s not true. I have track motion set and the SD card is still recording on my cam V3. So obviously it’s detecting motion.

sorry, I meant the" detection zone"…when you go to turn on the motion tracker it says I have my detection zone on, so would have to disable that…my cameras always were able to scan and move when I set my detection settings on and used the detection zone…sorry for the confusion.

That makes sense. Why use zones on a panning camera? Just use a fixed camera then because the zone only applies to one particular direction. That explains why it stopped panning; “Track Motion” was silently turned off, as I suspected.

yes, just wondering why they panned the whole time even when the “detection zone” was on. I think it makes people more paranoid when they see a camera following them!! LOL…thanks again

Wyze cam pan v/3 not moving

Cameras

Crease March 22, 2025, 4:30pm 2

Your issue reminds me of another recent topic where at least one user was able to get the cameras working as expected again:

What troubleshooting have you attempted?

Topic		Replies	Views
Wyze cam pan V3 not moving properly Cameras android , cam-pan-v3	6	520	September 30, 2024
Cam Pan v3 no longer pans stares in one spot Cameras support , troubleshooting , iphone-ipad , cam-pan-v3	3	236	August 18, 2025
Pan Cam V3 not panning Cameras android , cam-pan-v3	2	240	March 15, 2025
Camera is no longer tracking or panning Cameras android , cam-pan-v3	1	280	April 26, 2025
Pan Cam V3 doesn’t move (2nd one now) Cameras iphone-ipad , cam-pan-v3	2	289	April 5, 2023

Wyze cam pan v/3 not moving

Related topics