Wyze app 2.40 Release Candidate Test 2/27/2023

[SlabSlayer]

This RC release still contains the issues previously noted in the prior build:

Wyze app 2.40 Beta Test 2/16/2022

Beta App UI issue when adding Cam actions to rules: Once the cam action has been successfully added to the rule, if the cam name is too long, the “Edit” pencil starts to be pushed off of the page by the cam name until it is gone. When this happens, the only way to edit the action is to delete it and start over or go back and rename the cam making it short enough for the pencil to appear. The “Edit” pencil should be anchored and the cam name truncated to the specific length limit of the device…

Wyze app 2.40 Beta Test 2/16/2022

Another issue in the Beta App as it applies to the Rules building UI & Actions for the Thermostat: When selecting the Thermostat for Actions, if I choose Turn On Heat Mode, the Turn On Off Mode becomes unselectable. This is good. However, Turn On Heat Mode does not deactivate Turn On Cool Mode. Both can be selected. In fact, if I toggle the three, I can get any two to be selected at any given time. I can’t really think of any situation why two conflicting commands should be allowed to be sen…

Wyze app 2.40 Beta Test 2/16/2022

Additional Rules Action Toggle Conflicts. Tested on V3, V3Pro, PanV3. Suspect it is on all cams w\ siren. Turn On Siren and Turn Off Siren are conflicting Action commands that can be set to execute simultaneously on the same cam. [Screenshot_20230225-145608-378]