After updating to software v2.14.33 yesterday morning, I no longer can pan my cameras by swiping my finger across the screen. I was able to do this prior to the update. I CAN pan with the 4 dots when the respective cam is selected, but CANNOT pan with a screen swipe either in regular or expanded landscape mode. Is anyone else experiencing this anomaly?

It’s still working in bata app version 2.14.11.(newest) Make sure your app is updated. Have you tried forcing close of the app and reopening it? If that doesn’t work try deleting and reinstalling the app.

Deleting and reinstalling the app worked–THX. HOWEVER, I now was able to observe the anomaly (recreated it). Two of my pan cams have detection zone enabled. This new software update notifies the user (if a cam is manually panned) that the cam will automatically return to the programmed position after 15 seconds and gives the user the option to check a box noting that the app should not remind the user for 14 days. The first time I was notified as such, I did NOT check the box and just cancelled the notification. The manual swipe pan feature worked for a few minutes, then quit (I again was unable to manually swipe to pan the cam). I uninstalled/reinstalled yet another time, and when again faced with the prompt notification about the 15 second auto return, this time I DID check to not notify me for 14 days and this appears to now allow me to manually pan my cams. SO TECH SUPPORT, TAKE NOTE!!

I’m not a Wyze employee, I’m a user. I have sent your feedback to the @WyzeTeam so they can address the issue. I don’t have this issue with the bata app. Any other @Mavens with this issue?

Doesn’t seem like I’m having the same problem When I opened the app I was able to manually pan the camera no problem, the notification about the detection zone did pop up, after that I was still able to manually pan the camera with no problem. After I turned off the detection zone the camera stays wherever I put it ,that’s great

Sounds similar to the convo over here: [image] Update 4.9.6.193 (V2) and 4.10.6.193 (Pan). Should I or shouldn't I? Cameras If you have a pan cam…DON’T DO IT!!! I have 3 pan cams and the motion tracking has stopped.

Yep this problem hit me too, it sucks using the little dots because it overshoots the pan, yet another problem with this camera :sleepy::pensive:

Search for my solution in the Wyze Forums!!

I see that u say delete and reinstall the app, but won’t that make you have to press the reset button on the camera to put it back on app?

I believe that all of your cameras and presets are embedded in your Wyze account. Therefore, Uninstalling and reinstalling the app will not affect those items…at least it never has for me! I would not rest your cams unless they are not responding, AND the way I do it is either through the reset option within the app or I unplug/plug in each cam. I only have hit the reset on the bottom of the cam to install new cams, sensors, contacts and bridges. No need to go overboard if not necessary!! Good luck!

Unable to move Pan Cams with Finger Swipte

Cameras

Omgitstony October 16, 2020, 3:53am 6

Sounds similar to the convo over here:

Topic		Replies	Views
Pan Function problems Cameras cam-pan-v1 , android	2	371	October 26, 2020
Pan Cam Pan Scan Recording ALL panning movements Beta	9	782	September 26, 2020
Magically Solved: Cameras won't pan after app and firmware updates Cameras not-platform-specific	4	530	November 8, 2020
Update 4.9.6.193 (V2) and 4.10.6.193 (Pan). Should I or shouldn't I? Cameras android	35	1878	October 16, 2020
Dragging my finger on the live stream video to pan and tilt no longer works on Android v2.14.33 Cameras android	7	906	December 13, 2020

Unable to move Pan Cams with Finger Swipte

Related topics