Crease
June 29, 2024, 7:37pm
4
I can see something like that working for Cam v3 or other models that can accept a standard 1/4"-20 mount screw, but Cam OG isn’t tapped for that size of screw to connect to its base.
I got the new OG Telephoto to play around with and right off the bat I notice the mount is not great. It only has the ability to tilt in one direction (bearing), and this made it useless for me. There is no way to rotate the main stalk after the mount has been screwed down, such that the tilt notch can be aligned in the direction I needed.
Also, Wyze has changed the screw thread for the mount post to 4mm. This makes is incompatible with most mounts out there. Thanks for that Wyze (rolleyes) …
The Cam OG uses a nonstandard #8/32 screw mount for the camera stand. The v2/v3 cams use an industry standard 1/4"-20 screw mount, allowing you to use literally thousands of different 3rd-party mounts with your cam. It is very difficult to find a 1/4"-20 Female to 8/32 Male screw adapter. So…
Wyze, please make a new accessory: the Wyze 1/4"-20 Female to 8/32 Male screw adapter. It would greatly increase the versatility of the Cam OG and incent people to upgrade their Cam v2/v3 since they wo…
Unfortunately, that solution wouldn’t work for @breckenridgedeb without some sort of additional adapter.