To whom it may concern: My Wyze Cam v3 was bricked yesterday during your latest firmware update. It’s completely inoperative. The red light comes on, but that’s all. No video. I am not able to reset the camera by pushing on the reset button on the bottom of the camera, even if I click the switch on…

This is a user to user forum for the most part, your best bet would be to contact support. The setup button may have some corrosion in it. You can try using something pointed (but not sharp) to press it harder, try to move it around a bit. If you can get it to respond, then you should be able to …

[image] rechristy007: I doubt if the camera can accept an older firmware flash because the camera is completely broke. I have Auto Updates for firmware Off in my App. I like to update each v3 individually to see if each update goes smoothly. You could try manually flashing the firmware. The …

There is nothing wrong with the switch. There is no dirt in it. It’s been covered by a neoprene rubber seal since I purchased the camera. The only way a firmware flash will work is if the switch is able to activate the existing firmware or some other code in memory to start the setup process. The sw…

How do you know there is nothing wrong with the button? It is not uncommon for the setup button to get some corrosion in it from moisture causing it to not make contact. You wouldn’t feel this, the button would feel like it pushes in fine. Sometimes pushing it more firmly (multiple times) with so…

[image] rechristy007: There is nothing wrong with the switch. There is no dirt in it. It’s been covered by a neoprene rubber seal since I purchased the camera. As Dave said, the button not being overly responsive is pretty common. If you are pressing with your finger, it is VERY common for i…

[image] K6CCC: 4.36.16.7064 I don’t see that Firmware anywhere is it Beta? All 6 off my V3 cams are at .6114 and say up to date.

Likely yes. I have been in the beta program for every camera type that I have for many years.

I agree, there was no firmware release for v3’s on 6/22. The Wyze News channel would have listed it. Run BETA firmware and pay BETA prices.

[image] Antonius: I don’t see that Firmware anywhere is it Beta? :backhand_index_pointing_down: [image] Wyze Cam v3, Pan v3, Pan v2 & v3 Pro Firmware Beta Test 6/18/2026 Wyze Cam v3 Beta: Version: 4.36.16.7064 What’s New: Bug fixes

This all sounds so frustrating. Yes wyze should replace it. Write a letter to the head of wyze. Buy a new one and send bill. I am so sorry, i rarely update as a result.

My Wyze Cam v3 was bricked by your latest firmware update on June 22, 2026!

Cameras

Crease June 26, 2026, 5:21pm 10

Topic		Replies	Views
Wyze Cam v3 Pro firmware - Released 3/6/2025 Wyze News update	59	1927	April 3, 2025
V3 Bricks Again! 😢 by 8-26-21 update Cameras cam-v1-v2	20	1888	September 23, 2021
New V3 update at installation KILLED IT now solid red light of DEATH Cameras android , cam-v3	47	920	September 7, 2024
Firmware Updates equal death? Cameras support , troubleshooting , bug , cam-v3	36	2370	May 17, 2022
V2 cam bricked after firmware update Cameras cam-v1-v2	40	7333	February 9, 2024

My Wyze Cam v3 was bricked by your latest firmware update on June 22, 2026!

Related topics