Hi. This serves as a warning for everyone. DON’T UPDATE FW to 4.52.8.0648 I made mistake (again. First mistake was buying Waze’s camera) and upgraded FW. Everything worked well on 4.52.7.0367. No issues with wifi. I received an upgrade notification and agreed to it. After firmware upgrade to 4.52…

[image] tomekgg: you are acting like a person who goes into the dentist’s office and yell “my teeth are ok” My teeth are okay, but I still get them cleaned every 6 months.

Mate, you are asking me to do sth I clearly wrote I tried before. Still, I appreciate your effort, because it’s good to occasionally re-check if one has done all that is needed. Regarding the quality of forum members - yep, you may be right. I thought Support was bad. Lesson learned. Although, I r…

[image] tomekgg: Although, I received some helpful advice from other forum members. Maybe I just need to ignore certain … individuals. I have heard you can mute people in the forum. Ignoring works for me. Okay this is my last post on this thread. Sorry if I came across rude.

Hi, I found this post because I updated my cameras yesterday and ran into the same issue as the OP. After update to latest firmware (4.52.9.xxx) the 2 cameras I have suddenly weren’t connecting to WiFi. I tried reconnecting them, but my WiFi wasn’t listed anymore and entering it manually didn’t hel…

Welcome to the Forum, @gligoran ! :wave: The experience you describe reminds me of this recent topic, which may be instructive: [image] Cam-v4 lost my Wi-Fi network after the 4.52.9.1134 firmware "upgrade" Cameras I bought cam4 originally with the 4.52.7.0367 firmware. T…

Yeah check out the thread that @crease mentions, based on what was in there I personally think it is likely the WPA3 causing issues (or possibly WPA3/2 transition mode which has always been problematic, but in this case I think WPA3 may have been broken on the camera in recent firmware). You can tr…

It was previously set to WPA2 + AES and to the whole b/g/n/ax and it didn’t work. Disabling AX and downgrading to WPA2/WPA was the only way I found it to work. I’ll do more testing in the coming days as I need to isolate some variables and I also need the time to power-cycle both the camera and the…

I would definitely recommend turning it back to WPA2 (AES only) for security. Disabling AX may also disable WPA3 (if the router doesn’t have a separate option for that) or maybe it is the AX protocol causing issues, but either way hopefully you can get it to work with at least WPA2, the person in t…

Finally had time to test this out when others in the house wouldn’t be constantly complaining about the internet dropping out. Interestingly enough I was able to turn it both back to WPA2 (AES only choice available) and also the ax mode (technically the Auto (b/g/n/ax)) and both cameras still conne…

Another person had a similar result, they only had to disable WPA3/AX mode to get the camera to set up and do the initial authentication, then they were able to switch back to WPA3/WPA2 transition mode and re-enable AX. Once the camera has authenticated, it remembers the protocol it used so adding …

Cam V4 - no longer sees my wifi after FW upgrade to 4.52.8.0648

Cameras

Crease November 27, 2024, 4:24pm 37

Welcome to the Forum, @gligoran!

The experience you describe reminds me of this recent topic, which may be instructive:

Topic		Replies	Views
Cam-v4 lost my Wi-Fi network after the 4.52.9.1134 firmware "upgrade" Cameras android , cam-v4	11	754	November 18, 2024
Firmware Updates - 12/3/2025 Wyze News update , cam-pan-v3 , cam-v4 , window-cam	51	1365	February 16, 2026
Wyze Cam v2 and Wyze Cam Pan Firmware 4.X.9.1433 Released 9/27/2022 (Slow Rollout) Wyze News	137	12336	December 5, 2022
Wyze Cam v4 beta firmware - Released 11/6/2025 Beta	45	1394	November 17, 2025
Wyze Cam v3 Pro firmware - Released 11/1/2023 Wyze News update	81	3471	March 8, 2025

Cam V4 - no longer sees my wifi after FW upgrade to 4.52.8.0648

Related topics