4 cam pans have been working for years. There have been no changes to cameras or to network or to overall number of devices. A day or two after firmware upgrade, the 4 cam pans were “device offline error code 90.” I powered them off and on; nothing. I did factory reset. They connected, but as s…

4.10.9.1574 seems to have fixed the issue. :slight_smile:

[image] A1A1: For Wyze to not allow rollback to previous firmware is interesting to put it mildly. You should be able to downgrade firmware, but it is a manual process requiring an SD card and downloaded firmware. [image] How to flash your Wyze Cam firmware manually Note: It is r…

All prior firmware downloads were removed from the Firmware Release Notes page due to the new security updates: Due to the security improvement on this firmware, you will need to go through the setup process for your camera if you go back to firmware 4.9.8.1002 or below. Because of this, we are re…

Well, isn’t that special. So now there is no way to fix broken firmware. Now it is even more important to prevent automatic updates, unless you really want bricked equipment.

[image] SlabSlayer: if you go back to firmware 4.9.8.1002 [image] SlabSlayer: we are removing those firmware files from this page :question::thinking::man_shrugging::crazy_face::question: It certainly does create a contradictory dilemma feedback loop doesn’t it! Fortunately, there ar…

[image] SlabSlayer: Fortunately, there are muted whispers of users who previously squirreled away a reserve copy for safe keeping. :shushing_face: I had to operate on back level firmware for years due to a problem they introduced with motion based event capture on the cam pans. Seems to me I …

[image] secondary_2g: due to a problem they introduced with motion based event capture on the cam pans And it has been resurrected. [image] Wyze Cam v2 and Wyze Cam Pan Firmware 4.X.9.1433 Released 9/27/2022 (Slow Rollout) Wyze News Running 4.10.9.1433 on Pan V1 W…

[image] SlabSlayer: And it has been resurrected. Seriously? The cam pans now don’t capture events based on motion again? I literally just updated my only v1 yesterday. It’s almost like the company is going full-on turd… CCP directives? :thinking:

They do motion capture, but it isn’t right. Check yours out and report back any issues. The issues I have w\ the new FW are horrible CamPlus AI detections, short CamPlus video events, horrible motion tracking, choppy video, etc. It actually started a long time ago from .860 in January and .1002 in…

Hi. I had the same issue with my WyzeCam v2’s after the update. They would reconnect to my router after the update ONCE. As soon as they were restarted or power cycled, they would no longer connect. Going through setup again fixed it again… until a restart! To fix the issue I had to manually flash …

I was able to get 2 of the Cam Pan V1’s to flash back to 1002, but the other two refuse to budge from 1433. They’re making it really tough to feel any sense of brand loyalty.

Cam Pans suddenly won't stay connected

Cameras

SlabSlayer October 17, 2022, 10:27pm 16

And it has been resurrected.

Topic		Replies	Views
Wyze Cam v2 and Wyze Cam Pan Firmware 4.X.9.1433 Released 9/27/2022 (Slow Rollout) Wyze News	137	12532	December 5, 2022
Cam Pan suddently not connecting Cameras cam-pan-v1	32	3106	December 3, 2021
Wyze Cam Pan firmware 4.10.1.8 released to public! Services & Integrations cam-pan-v1	52	3224	August 8, 2018
Constant "connecting camera" and "authenticating" Cameras cam-pan-v1	80	14912	May 8, 2020
Wyze Cam Pan 4.10.3.60 Update Wyze News update	63	7642	August 9, 2019

Cam Pans suddenly won't stay connected

Related topics