Yesterday, I updated firmware on six cam 3 and it updated only four. Two of six have failed to update firmware and can’t connect to the local network anymore. Reset cameras and router didn’t help. I reset one camera with updated firmware and it reconnected without issue. Looks like firmware upda…

Oops! The camera is working now BUT it used to record 12 seconds of motion and upload it – because I was one of the early adopters for CAM PLUS… I don’t subscribe but my two Cam 2 and 2 Cam 3s all had the motion enabled. Now the Cam 3 that crashed during the software update no longer shows 12 second…

[image] mowbray.david: Now the Cam 3 that crashed during the software update no longer shows 12 seconds of motion. It does record to the SD card but only shows a still photo, the same as my newest Cam 3 Your old cams that were still getting legacy 12s video without a subscription shouldn’t ha…

I recommend the WYZE engineers add some code to either buffer the new firmware download to each camera and confirm a complete download before installing, otherwise the cam just reverts to existing firmware and shows a failed update — OR — they add code to batch updates to run in serial rather than p…

All that needs to be posted in the Wishlist topic I linked above. Wyze won’t see it here. They monitor the Wishlist .

Completely no joy. I’m an IT Professional and I know all about updating firmware on devices. I have Wyze Cam v3. Like many others, it fubar’d on 4.36.10.4054. I formatted a new 32GB card, Fat32, downloaded the latest firmware **[4.36.11.7095], put on root folder, put card in cam, hold setup, plu…

Some notes posted in a related thread. [image] Cam V3 will not connect Cameras SD Cards, in my experience, cause a majority of the issues with failed Firmware Flashes. I have purchased a brand in the past that, because of the wonky format on the card from the factory, abs…

I am assuming the answer is yes but I need to ask anyway have you tried different firmware from much earlier than the one that Bricked Your V3 camera?

Didn’t see it mentioned but have you tried to reset the cam a few times BEFORE attempting to reflash it? Have you also tried using a different AC/DC usb adapter? The reason i ask because i have come across adapters that fluctuate DC output under a load and that can affect the writing of the code t…

It has been a very, very long time since I have had the need to flash firmware to a V3. I have yet to need to recover a V3 from a failed update. Flashing them in my case is usually a reversion to test firmware glitch origins. During the initial rollout of 4.36.10.xxxx, I was flashing back to 4.36.9.…

Completed the following twice with a successfully updated and functional cam running FW 4.36.11.7095. The first round of Flash procedures all failed (NOT a Wyze problem - see below). The second round was fully successful: Factory Reset CamV3 without SD Card Used a Samsung 32GB SD Card Flashed to 4…

After firmware update cameras don't connect anymore

Cameras

SlabSlayer November 9, 2023, 3:20pm 76

Some notes posted in a related thread.

Topic		Replies	Views
V3 cams bricked by firmware update Cameras android , cam-v3	47	6489	December 2, 2023
Wyze Cam v3 firmware 4.36.11.4679 - 7/13/2023 Wyze News update	46	4853	August 5, 2023
Wyze Cam v3 Pro firmware - Released 11/1/2023 Wyze News update	81	3528	March 8, 2025
After latest update, cannot connect to local network Cameras android , cam-v3	53	14373	December 11, 2023
Firmware Updates equal death? Cameras support , troubleshooting , bug , cam-v3	36	2534	May 17, 2022

After firmware update cameras don't connect anymore

Related topics