I installed the new Wyze V2 Doorbell Cam, and everything works great except the house chime does not chime. I’ve triple-checked the wiring on the little chime controller module. The chime worked before installation. I also double checked that the chime settings in the app are set to “Mechanical” (w…

Kept have issues with the control even upgrading the transformer to 16v 30 VA wire the doorbell directly to the transformer. The cable run to my Internet is a 4 wire. In the old nutone door bell 2 we’re for the button and 2 for the speaker. The one for the speaker will now be used to provide power d…

Swapping the wires wired for me, maybe they got a batch hooked up wrong

I got the same problem. It was supposed to be an easy install with 2 wires (front and trans) and my transformer is 16v 10va. But after installing nothing from the chime… I tried to swap wires as suggested here and it worked but only halfway. I have a mechanical chime and only 1 hammer out of 2 will …

I was getting ready to pull my hair out until I found your workaround. Solved my issue, thanks.

Not sure if this is going to help anyone or not. I saw all the threads about eating a different transformer. I have an old house and an old transformer so it seemed logical to me. I replaced it and it still would not work. Someone in another post mentioned making sure the do not disturb setting was …

[image] mbroer: Once I set it to mechanical chime it worked. Just putting this out there in case the same thing happens somebody else. I felt kind of foolish. Thank you for sharing this. I don’t think there’s any reason to feel foolish, though. As I mentioned in another topic , this (prompti…

Had the same issue and used the alternate wiring instructions which worked for me. Not sure if I had selected mechanical chime before trying this though which I think I might try now. The chime works without the controller but I think it says somewhere that the controller is still required as it pe…

I have 2 doorbells, front equals 2 dongs, rear equals 1 dong. I first did the typical wiring that the Wyze apps tells you with the 3 wires with the chime controller. First result equals front chime works as expected. However, rear chime (1 dong) does not. Removed the chime controller and put all wir…

Not sure if you meant that you own two Wyze Video Doorbell V2, but I do, and my original doorbell was like yours (ding dong for front door, just dong for rear door). I was able to follow the instructions to wire both the front and the rear cameras, with the included chime controllers, and everythin…

I just did the re-wire trick and only got the one hammer ring. I thought about removing the wyze controller but do not want to damage anything. It is past the 30 days to return my unit. Any other fix updates?

Wyze Video Doorbell Cam V2 not working with house chime

Cameras

Crease December 2, 2023, 5:26am 22

Thank you for sharing this. I don’t think there’s any reason to feel foolish, though. As I mentioned in another topic, this (prompting the user to select the chime type) seems to be a step missing from the installation workflow in the Wyze app. Hopefully that will be corrected in a future update.

Topic		Replies	Views
Wyze Doorbell v2 chime controller not working Cameras android , video-doorbell-v2 , chime-controller	296	29941	September 27, 2026
V2 Doorbell don’t work with chime control in, but works without chime control Cameras iphone-ipad , video-doorbell-v2 , chime-controller	13	192	June 28, 2026
Possible to have a regular doorbell on one door and Doorbell v2 on the other? Cameras troubleshooting , not-platform-specific , video-doorbell-v2 , chime-controller	5	213	December 14, 2025
Upgraded from Wyze Doorbell v1 to v2, bypassed chime help Cameras android , video-doorbell-v1 , video-doorbell-v2	15	5161	September 10, 2026
What is wrong with this setup? Push button doesn’t work for mechanical chime Cameras iphone-ipad , video-doorbell-v2 , chime-controller	28	473	March 16, 2026

Wyze Video Doorbell Cam V2 not working with house chime

Related topics