I just purchased a new Wyze Doorbell v2 and it’s working great. The only issue I’m having is with the chime box. Before I switched it, everything was working as expected, no issues at all. Post install, only the hammer on the right is activating when the doorbell is pressed and very, very lightly to…

I had to zoom out your photo to read the numbers. The transformer is way under minimum for use with the v2. You need to replace it. Recommend an Amazon replacement in the 16 - 24 / 30 - 40 range. The price difference is negligible. They are easily replaced, especially since you have a breaker/fuse t…

@carverofchoice and you are the unabridged gurus of the Forum. :rofl:

I think that’s a polite way of saying that I’m verbose. :grin: I’ll take it! :wink:

[20241215_085702] This is what it says in the chime box. I’m not sure where to find the transformer, is that the number on the switch I flipped in the basement? If that’s the case it has a “15” on it. -Pyro

Thank you for the suggestions! This is tons of information and I appreciate it! I do not have any way of testing the voltage so I’ll skip to number two and see if I can get the black wires swapped. Do you know if I have to set up my doorbell each time I flip the power for it? I did the first time an…

That is the breaker in the electrical panel. Is there a device attached to the side of the electrical panel? If so, that is the transformer. Common place for them. If not, you will have to search for it. Hardwired Transformer for Ring Wired Video Doorbells Amazon.com: Hardwired Transformer for Ring…

BTW, a transformer is a tranformer is a transformer if you get that meaning. They are basically neutral for application purposes.

Thank you for the suggestion! After knowing what a transformer actually is, I do see it’s below the minimum spec advertised by way is 16-24V so that’s my bad I guess. I live in a townhouse development so I can’t go switching out the electrical units without permission, but assuming I can’t, is there…

[image] WildPyro: Would the alternate wiring help me at all? Maybe swapping the two black wires? I would skip those suggestions at this point, because I don’t think they’ll get you anything. The main issue for you right now is likely power, and I think that would explain the abnormal perform…

Even with the arrows pointing to terminal combinations on a tri-volt transformer, I always have concerns about a novice trying to make the appropriate connections. The 8/10 combo would be totally disregarded on that transformer. BTW, another great detailed commentary.

Wyze Doorbell v2 Chime Issues

Cameras

WildPyro December 15, 2024, 2:54pm 13

Thank you for the picture reference, yes I see that it’s located to the left of my fuse box.

-Pyro

Topic		Replies	Views
No chime inside for Wyze Doorbell v2 Cameras not-platform-specific , video-doorbell-v2 , chime-controller	16	276	January 10, 2026
Doorbell cam Wired correctly but no chime Cameras support , troubleshooting , iphone-ipad , video-doorbell-v2	22	3540	October 3, 2024
Wyze Video Doorbell Cam V2 not working with house chime Cameras android , video-doorbell-v2	41	9256	January 14, 2026
Possible to have a regular doorbell on one door and Doorbell v2 on the other? Cameras troubleshooting , not-platform-specific , video-doorbell-v2 , chime-controller	5	159	December 14, 2025
Best Wyze Wired Doorbell for a house with no installed chime Cameras android , duo-cam-doorbell	54	913	November 22, 2024

Wyze Doorbell v2 Chime Issues

Related topics