I have existing floodlights that I want to replace with Wyze Cam Floodlight v2. My Floodlights are mounted under the soffits on a horizontal surface. All the promotional pictures and videos show only wall or vertical mounting. So can this be mounted horizontally? There are no indicators or docume…

Looks like there is already conversation about this over here: [image] Product Release - 1/23/2024 Wyze News Can the V2 be mounted upside down under an eave like the v1?

So that thread really didn’t seem to answer the question the OP had. My issue is similar. I want to mount it under an eave/soffit, where I am replacing an old flood light. If I mount it HORIZONTALLY, with the hardware out of the box, correctly, not upside down, the angle of the camera is such that …

I came here looking for the same answer. I want to replace my flood light that is under the soffit as well.

[image] Tallyfins: with the hardware out of the box, correctly, not upside down, the angle of the camera is such that it is almost pointing DIRECTLY at the ground. If I try to tilt it up, at the angle of the mount, it will not go up any farther. Does the camera swivel on its mount arm?

It does, but it only swivels so far up based the max distance it will swivel. if I turn the cam upside down, then it will swivel up high enough to capture the driveway, etc. But then the image is upside down. The only solution I can think of is some type of “L-shaped” junction box that will allow m…

[image] Tallyfins: image is upside down In “Advanced Settings”, theres’s a an entry (Rotate Image 180°) to turn image right side up.

Support told me the same thing but there is no such setting for the v2 camera. All that is under Advanced Settings is 'record to microsd card;, ‘manage sdcard’, ‘night vision mode’, ‘camera status light’, ‘show timestamp’, 'show wyze logo, ‘record sound’ and ‘synch time’

Can you post pictures on how you have this camera mounted? Or pictures of where the mounting location is? Thanks in advance!

I want to mount it flush/horizontally where the black tape is currently holding it in place. However, the arm is currently extended up as much as it will go. If i mount it flush on the horizontal surface, then the cam itself points at the ground. I CAN rotate it 180° but then the image is upside do…

Wyze Cam Floodlight v2 Mounting Options

Cameras

Omgitstony February 5, 2024, 5:35pm 15

You sure you can’t get to look like this?

Rotate the base so the camera is forward, towards the way it is looking. Then swivel the camera like in the pictures.

Is that not how you’re trying to mount the camera?

Topic		Replies	Views
Floodlight V2 upside down Installation Cameras floodlight-v2	4	1111	June 13, 2024
Wyzecam floodlight v2 mounting orientation Cameras iphone-ipad , floodlight-v1	3	178	October 17, 2025
Need help with mounting new Wyze cam with floodlights Power & Lighting floodlight-v1	24	9338	August 3, 2025
Can Wyze Cam Floodlight be mounted horizontally? Power & Lighting cam-plus , floodlight-v1	1	217	October 27, 2024
Three Questions about WYZE Cam v3 and the WYZE Spotlight Cameras cam-v1-v2 , android	9	916	August 8, 2021

Wyze Cam Floodlight v2 Mounting Options

Related topics