I just setup Home Monitoring last night and ran an alarm test this morning. I found the volume of the Siren to be very quiet. I have the volume on the Hub set to High and I think the Arming/Warning chime is significantly louder than the actual alarm. Since it’s just using a speaker instead of a Pie…

Today’s Firmware release is the one to Boost the Hub Volume: 4.32.9.249 (April 25, 2022) Enhanced Wyze Sense Hub audio volume

Will this fix the last update kill of my connectivity or should I wait for my replacement hub before installing?

No, it hasn’t fully resolved the connectivity issues [yet]. Here are the full release notes for this firmware: So it does fix the entry notice bug, but not all the connectivity issues experienced by some people. Some people have reported that if they delete their hub and restore to factory setting…

My hub is somewhere in the twilight zone…All 3 lights flash on/off simultaneously but I can arm and disarm the system. I cannot add any sensors because the hub will not respond to that process. The lights have been flashing for 3 days now. Honestly, I am afraid to touch it at all until the replaceme…

I can totally understand wanting to play it safe in your situation. If it were me I would be tempted to wait as well. I personally don’t think the new firmware would make it worse, but it wasn’t designed to change the connectivity issues yet either…if you install new firmware it might force your hu…

Here’s the latest update on the issue for everyone. It explains why they previously reduced the volume and how they now can keep it loud for us while it is plugged in: [image] Fix-It Friday 4/1/22 Wyze Sense Hub volume is lower than it used to be We’re happy to say that we just released new Wyz…

I bet you just did the firmware update. Happened to me too, but I had an extra hub already. I did finally get it to rest after 5 or so press and holds on it.

Dsignman01, Not positive if your reply was directed at me but…I have gone through 3 hubs-All killed by the 4/8 update. If you know a way to “revive” them, please share!

Yes Hoot, it was a reply to you. I had the same. Spent 2 hours with the “Wizards”. That was a joke. I did the hub reset around 5 time and it finally reset. I am not using that one, but it looked ok. They did just release another firmware version yesterday. My existing hub accepted it, but I ha…

The Wyze “Wizards”. IMHO the only “wizardry” is how do they keep their jobs? Untrained and/ or incompetent are the first 2 words that come to my mind when I hear that name. Dangerous is another. I almost feel sorry for them. I would hate to have to deal with”me” without any training on the product I…

Home Monitoring / Sense hub Siren Volume

Sensors

carverofchoice April 26, 2022, 12:57am 48

Here’s the latest update on the issue for everyone. It explains why they previously reduced the volume and how they now can keep it loud for us while it is plugged in:

Topic		Replies	Views
Sensor hub volume has decreased considerably after latest update Sensors sense-hub	223	10367	August 11, 2022
Add a loud Siren (also integrated with HMS) Maybe Later maybe-later	453	41701	September 15, 2024
Doorbell chime/WCO siren/Wyze cam v3 siren integration with HMS Maybe Later maybe-later , services	24	2717	March 8, 2024
Home Monitoring Sense Hub & Keypad - Chime when Doors/Windows are opened Wishes Granted wish-granted	159	14323	November 21, 2021
ALARM function / External Alarm Siren Maybe Later maybe-later	68	8556	January 20, 2026

Home Monitoring / Sense hub Siren Volume

Related topics