Firmware update from 1.6.113 to 1.6.199 bricked my vacuum?!

[purchark]

Can you turn it off while in this state?

Either way, as a last resort, disconnecting the battery for 30 seconds could help get it out of a bad state if the firmware is still workable.

Robot Vacuum Battery Replacement

Here are some photos showing how to replace the battery on a Wyze WVCR200S robot vacuum. Invert the vacuum and remove the main roller brush. [image] Remove the 4 Philips head screws holding the battery cover. [image] Remove the battery cover exposing the battery. [image] Lift the battery straight out being careful not to yank the wires out. [image] Disconnect the connector by squeezing the latch. [image] [image] Assembly is the reverse of disassembly. The wiring from the battery…