I had an issue before with getting a camera to reset, and spoke with a tech via chat. They instructed me to download some firmware and to manually flash the firmware. That solved the issue with that camera, but it will not work for this camera. When I plug it in, it starts off solid yellow, then goes to flashing blue. All I want to do is factory reset it so I can go back and set it up. How can I accomplish this?

Ok, didn’t know if it was left out and restarted normally, without any factory reset attempts. I am all out of ideas!

Sounds like maybe the button contact on that camera isn’t hitting. Corrosion, misalignment… Could be fixed by blowing it out or disassembling and using an eraser / alcohol.

I have the exact same issue. I cannot reset my cam pan. The blue light blinks for hours, I never hear a sound, if I continue without a sound it never connects. No card installed. I took the back off the camera and it looks very difficult to get to the switch and test it or clean it. I think the camera is history because the switch does not work.

I only received the cam pan v2 yesterday. It successfully connected once but it had to be moved and it won’t reset. I hear something rattling around inside.

I have the Wyze Pan v2 model and my factory reset is not working either. Camera says offline (error code 90) and no matter what I try I cannot get it to work or reset

I have two v2 cam that I’m trying to add to my setup. The devices have never been on my network. After reading all the steps above, the cams power up (yellow light) then after 5 seconds go to the flashing blue light. Never heard any voice prompts. The reset process didn’t work. I assume these v2 cams are now bricks?

[image] markgayee: Never heard any voice prompts. [image] markgayee: I assume these v2 cams are now bricks? Not necessarily. I had a couple go mute after the recent firmware flashing fun. [image] Wyze Cam v2 unresponsive after firmware upgrade Cameras The Silent Install Not sure where exactly the process is failing on your cams, so this may not apply, but just in case - one thing a Wyze tech told me that worked was to be prepared for a mute V2 - ie do NOT listen for “ready to connect”. So, insert the small partition SD card with the “demo.bin” file on it into the V2, press and hold the reset button while plugging in the power cord and keep it pressed until the light turns purple (yellow+blue), then release the reset button and walk away for…

Try manual flash firmware 1002.

same issue here. I have tried everything mentioned on the forums but it is still the blinking blue/yellow light. I have tried factory resets, firmware updates, leaving it unplugged, etc. It is basically a paper weight now. Complete junk. I am so glad I do not own more than two Wyze cams. I have 11 iSmart cameras that work flawlessly. I only bought the Wyze cams because I was not able to find any more iSmart cameras on Ebay but luckily I was able to aquire a few more iSmart cameras recently and only use the Wyze cameras as back up if needed.

yeah i have this same issue. manual flash firmware doesn’t work also. sad

Cannot reset my Wyze V2

Cameras

sodcam December 16, 2022, 6:08pm 28

Not necessarily. I had a couple go mute after the recent firmware flashing fun.

Topic		Replies	Views
WyzeCam Blinking Blue Light Cameras cam-v1-v2 , not-platform-specific	4	3236	August 16, 2026
Wyze Cam V2 Clicks, Factory Reset does not work Cameras cam-v1-v2 , android	11	3850	July 1, 2026
Webcam/factory reset Cameras cam-v1-v2 , not-platform-specific	11	1108	July 15, 2026
Wyze cam will not factory reset after update Cameras cam-v1-v2	3	862	November 20, 2021
Wyze V2 won't factory reset Power & Lighting iphone-ipad	2	1906	October 4, 2020

Cannot reset my Wyze V2

Related topics