Can no longer enable Person Detection

[Bam]

well first off, here is a link to the firmware release notes and thus the firmware files you will need.

Release Notes & Firmware

flashing back to original firmware is similar to how you flashed the rtsp just with a different file on the card for doing the flash.

@DreadPirateRush

1. Download a specific version of firmware, unzip it, put it on root directory of your SD card and rename it to ‘demo.bin’
2. Power off your camera, insert your SD card
3. Hold the setup button, plug in your USB cable, keep holding the setup button for 3-6 seconds until the light is solid blue, then release the button.
4. Wait for 3-4 minutes. The camera will reboot and change light status during this time.
5. After it is done, your camera should be functioning with original setup. No need to re-setup your camera! instructions…

this should be all you need to do.