Cam pan v3 waypoints are offset (eventually) if motion tracking is enabled

[esunarto]

when i turn on the motion tracking, and wyze cam pan 3 tracks motion to outside its motion range, the saved waypoints are offset and become useless.
i have to “reset” the camera positioning by directing it to look all the way up and all the way down, then the waypoints are correct again.
i’ve lost many motion events due to the waypoints are pointing to the wrong direction (ceiling)

worth noting that this used to work flawlessly, just starting to show this symptom the last couple months
please help!

[grapefruityoda]

I believe it’s been an on-going issue for a while now with the Cam Pan v3.

Wyze Cam Pan v3 Drift Update

Problem Statement We have identified noticeable drift for Waypoints when Pan Scan is used on Wyze Cam Pan v3. This is a general challenge across all of the Pan-Tilt-Zoom (PTZ) cameras due to hardware limitations. On Wyze Cam Pan v3, we can pre-set 4 Waypoints (A, B, C, and D) in total. When monitoring Waypoint B, there are two track paths: 1) it moves from Waypoint A after monitoring Waypoint A; or 2) it has moved from Waypoint C after monitoring Waypoint C. With these two different paths, an o…

What you can do to mitigate this issue for now is set up a Rule as per @edmcman:

Wyze Cam Pan v3 Drift Update

I’ve been using this as a workaround, and it has worked great for me. [image]