Dear Beta testers, We have the 2.11 beta app for you to test today. Here is the release note. APP VERSION: iOS: 2.11.30(3) Android: 2.11.32 WHAT’S NEW: Updated the Event page UI Added support for Wyze Bulb Sleep Routines (not visible until firmware upgrade) Added support for Wyze Cam Outdoor Bug fixes SUGGESTED TEST AREAS: Feedback for new Event page UI Wyze Bulb Sleep Routines Please let us know if you find any issues, thanks!

The viewed events turn to a gray background.

The difference in background colour on all of my devices is so subtle that I didn’t notice it until you pointed it out. I think the old way of displaying the device name of unseen events in bold text was far more obvious and it was visible at a glance. The new design of the event list takes up more space than the old design and on a “small” (5 inch) screen they have a negative impact on usability. Please roll back this change or provide a better solution.

Did auto-unlock break for anybody else with this update? Mine was working great until the latest beta.

@WyzeAndy, @UserCustomerGwen sent me over here to report a “bug” in the Wyze Beta app. (I am testing something else.) When the Band firmware update was made available to the general public, I went to upgrade my band. I noticed on the band settings page the new fw version 1.1.1 was displayed, but it screen did not display the version currently installed. That is different from every other product and I thought I’d let you know what I found. Edit: I made a mistake when I said the band didn’t show the installed FW version. I was when I updated the scale FW. Sorry.

This is a reminder that the Contact Sensor’s notifications for the “Is left open/closed” settings are still broken. Users have been unable to set or change this setting for months now. This has been reported in multiple “App Release” threads as well as multiple Support tickets. It seems as if Wyze has been wasting money by sending out replacement contact sensors instead of investigating the app. (I’ve received two sensors, which also don’t work, and I know of at least one other customer with the same experience.) Since this feature used to work, Wyze would save money by investigating the regression instead of needlessly mailing out replacement contact sensors. My own ticket is: 567655

Developer should read issues in .80 thread. and correct them if possible. my view.

In my experience, the “working” range of the sense devices is very poor, regardless of how strong the app reports the signal to be. For example unless my motion sensor is within a couple of metres of the bridge, it detects motion and then remains stuck in the “motion detected” state, indefinitely. This problem makes it absolutely useless. I’ve seen no evidence at all that the developers participate in this forum. I’ve also had no feedback on any of the bugs that I’ve reported. It’s very disappointing and discouraging that bugs and usability issues in the app are never addressed in this forum by the developers. There are issues that simply never get fixed while cosmetic changes are implemented, for example the recent change to the events list. When I bought my first Wyze cam, Wyze had a reputation for being responsive to it’s user’s but I can’t see that any more. A good example is the discussion about “Greater Control Over Detection Zone Shape” that has been raging for more than a year. No improvement has been rolled out but instead, a few months ago the developers increased the minimum size of the detection zone, which makes the issue worse for some people, including me.

Auhnivek. My auto unlock has not functioned in any consistent way since it was installed during the early release. I assumed the lock was defective. I made contact with the product manager, who told me replacing it wouldn’t help. No follow up although I have sent many logs. I really think that Wyze should STOP falsly advertising a sought out feature that they cannot make work. But to be honest, I guess it can’t be a Beta issue as I tried the mass release app , which also doesn’t wor k, where is @wyzeteam wyzejonathan

Move fast, break things, sell near cost, provide free storage, AND remain responsive to customers and perfect the products? It can’t last forever. :frowning: Maybe just growing pains, or maybe they’re looking to grow fast enough and sell.

Hows it going WyzeAndy… I have an Android phone with the App Beta version 2.11.32. I was asked to test this version to see if the notification delays have been corrected. I assume that I can pass this on to you or in this post, but the notification delays on an Android phone has not been fixed. Here is my experience: When the phone is on a charger, notifications are close to instant when the phone is unlocked and being used, notification are close to instant when the phone initially locks - known as light Doze, notifications work as well When the phone is locked / Idle for a period of time, the notifications are delayed severely. I have noticed delays ranging from 5 minutes to 1 hour or more. This is a concern as notifications are paramount when using this technology. Note: my iPhone is not impacted with the same delays. also note: I have done all of the settings to ensure notifications are supposed to function. As a developer myself, I sent the Android development documentation which talks about Doze mode and how to set things to ensure notifications are sent. In addition, the problem does not exist with Arlo and Eufy cams. I also reached out to Google as I have a Pixel 4 and because we are talking Android, as expected not much has come of this yet. Please let me know id there is something else I should try. There is a lot of chatter about this in the Forums. Now for an additional issue found: When you go to create a rule and select a trigger device, the non Camera’s show up as numbers and characters as shown in the image. Because of that, it states the device is not found. [Screenshot_20200603-210810] EDIT: Forgot to mention that I do like the new event screen, The groupings makes it easier to locate or track items. At least for me. Hopefully something can be done with the main screen to see similar items grouped like the events - maybe by type. There is a wish list item which I also put some screen shots for tablets, but someone else put a main screen design together which would be a positive change (again, I think…). Edit 2: the recent update 2.11.37 seems to have fixed the device naming issue on my Pixel 4 android phone. Now will test notifications… hopefully it has been fixed as well. thanks

2.11 beta App Release - 5/27/2020

Beta

Loki June 7, 2020, 1:02pm 43

There’s a Wishlist topic for that:

Topic		Replies	Views
2.21 Beta App, Wyze Cam Outdoor & Base Station Firmware Beta Test 5/26/2021 Beta	35	2197	June 3, 2021
Wyze App 2.11 Released! - 6/10/20 Wyze News update	102	7626	July 8, 2020
Wyze App 2.10 Released - 4/21/20 Wyze News update	78	5609	April 30, 2020
2.21 Release Candidate App, Wyze Cam Outdoor & Base Station Firmware Beta Test 6/2/2021 Beta	32	1107	June 14, 2021
2.26 App Beta Test 10/28/2021 Beta	58	2665	November 13, 2021

2.11 beta App Release - 5/27/2020

Related topics