Wired up per the orbit manual and tried wiring per Wyze instructions, in both cases the system would skip with no rain.
Wired yellow to sensor terminal, white to “C” and red wires to the 2 24v terminals. Now the system operates correctly. Skips when rain is detected by the sensor and waters when no rain.
Sprinkler controller and Orbit rain sensor
Sprinkler system goes into continuous skip once the rain sensor has activated and then deactivated. Brand used is Orbit wireless.
[Mod Note]: Your duplicate topic has been merged to conform to the Community Guidelines. Please avoid crossposting the same issue in multiple topics.