I’m having a lot of issues with very low signal. I’m within 20 feet of the bridge. It’s the connector sensors I’m having issues with. It’s possible I have a lot of interference from something else but can’t pin point it. I’m open to any suggestions. I swapped out the bridge to a v2 cam… no change…

Just buy the extra bridge and sensors like I did. They don’t have to be sold separately. I’m sure you can use the extra sensors. They could easily sell the bridge for the same price as the bundle.

If it’s that much of an issue for you, buy the sensor package and sell the magnets and pir and keep the bridge. Cheap at $20. And you might end up making some money off the deal. Just sayin :man_shrugging:

I posted this in another thread: I just realized that the sense system runs on the same rf band as a DSC and many other wireless alarm contacts so I’m thinking something like an Ademco or DSC 915Mhz repeater would solve the ranging issues. DSC PG9920 PowerG 915Mhz Wireless Repeater I’m going to hi…

Funny, at first glance I thought this was a political pun post as I didn’t associate ‘Democrat’ with an alarm sensor…

I just don’t get the “you invested in” part :man_shrugging:

Finally drilled a proper hole for the wire. [IMAG9160]

Hi, do all the dsc models work on 915? I think its an existing dsc impasse, old house with a few wireless sensors, an existing install from previous owner? Not found an simpler/cost effective alternative use yet, that is compatible with anything I have.

@Solardave Did you ever test the repeater? I haven’t had issues with the contact sensors yet, but I’m planning on buying some more of them, and they’ll be further from my camera, so I’m preparing myself in case I have a problem. Haha.

@nerdland Sorry but no I did not. I’ve been completely swamped and haven’t had time to play with any of the Wyze stuff. I’ve got sense, bulbs and switches siting in my bench waiting for me to come up for air. There appears to be a light at the end of the tunnel so hopefully soon.

Saw your solution of adding an extension wire and did likewise. I have a window at the far side of the floor from the bridge. I had noticed only one bar of signal strength and had some concern but seemed to work OK with only a time or two when connectivity was lost. That seemed to start to happen mo…

Wyze sense / bridge range

Sensors

NAMARTLU June 12, 2019, 3:45am 67

Finally drilled a proper hole for the wire.

Wyze sense keeps going offline

Topic		Replies	Views
Sense motion sensor offline Sensors	105	24941	October 9, 2021
Anyone have a Wyze Sensor working flawlessly? Cameras not-platform-specific	34	2830	May 19, 2020
Wyze sense keeps going offline Sensors	142	17467	September 27, 2021
Wyze Sense sensors will not connect to bridge Sensors	234	26657	September 16, 2021
Stand alone Wyze Sense Bridge Probably Not probably-not	89	12185	December 20, 2022

Wyze sense / bridge range

Related topics