USB extension between Cam and Hup

[gku2]

Yup it worked for me …
Also there is a post that claims that the heat cause by the cam in an encloser caused disconnects with the sensors when the bridge get overheated.

Found it…

Wyze Bridge Disconnects Non Stop

Come to find out with bridge plugged into the v2 cam it temps go up to 107° or higher. It’s only stable for about an hour at this temp. Higher output power brick, different V2 camera or shorter cable does nothing. The only thing that seems to be working is a foot long USB extension cable from the cam to the bridge so the heat from the camera doesn’t heat up the bridge. In doing this the bridge temp gets no higher then 85.5° and I haven’t had the first drop out. I’ve checked and all my V2 temp…