Two cameras on one power supply?

[StevenA]

If you do need to share a power brick, I would get a beefier Amp one and not use the OEM one that came from Wyze. Here is a good discussion on power adapters. Good luck.

Buy a better Power Adapter

I use a lot of these: Output: DC 5V/3.1A (note, 3.1A shared, so if you use all 3, it is 1A each, but if you use only 1 port then it is 3.1. So use 1 port only for Pan/Pro cams, and you can use more than 1 for the other cams like V2/V3/OG, etc) I also use several of these: 5V/3A output (3A per port, so you can use this for higher demand cams, even if using both ports): I do use the official Wyze adapters on some cams too, but I have bought and used a ton of the above adapters. Both of …