Fix-It Friday 9/2/22

[R.Good]

Wyze Floodlight 10 Minute Cool Down

I am not sure if this is a feature or a bug, but what I have found in 2 separate tests with the floodlight is that when PIR and Motion are selected to turn on the Floodlight there appears to be a 10 minute cooldown where once the floodlight is triggered, then turn off, the floodlight cannot be triggered to turn on again until 10 minutes later.

Here are examples (2 Different use cases but same results of the Floodlight Cooling down for 10 minutes)

Bug: Floodlight PIR is disabled when switch control Rule is enabled

I just did a test and set my Floodlight up to turn on if I double tap my switch, and turn off when I triple tap my switch [image] I made sure this worked, and turned the floodlight off and on a couple times using the double and triple press. All worked I turned off Motion detection to turn on the floodlight just to test the PIR. And only have PIR turning on the flood light. [image] When I walked past the floodlight the Floodlight came on. I then turned off PIR and set to detect motion on…

Floodlight Camera Question

Welcome to the forum @mooreimaging4. I see this same behavior as well. I am not sure if this is a feature so you can see the camera more clearly at night even though the v3 has starlight or a bug. What I have also noticed is the floodlight does not come on with each access to the camera. For example… I check the camera when it’s dark for the first time, the flood light comes on. If I view the camera again after the Floodlight has gone off, The Floodlight does not come back on. (I have my f…