Custom color shells/wraps/skins

I’m kind of surprised that CafePress or Zazzle isn’t already offering these.

But there is this:

which does offer a custom option


for the V2:
Take a picture of the spot you want to put it.
Print out a sheet.
Cut out the lens circle.
Stick on the front of the camera


So kinda like this?

Another option is to paint it with a removable paint like Plasti Dip:


just did this with 3 of mine…works pretty good if you know how to correctly put the dip on.

1 Like

I use the spray paint, just a matter of spraying multiple coats.

The cool thing about Plasti Dip is it is VERY light-absorbing, and if you have multiple cams it can cost MUCH less. Four cams = $1.50 a cam!


Wyze, you should create skins for your cameras. Different colors that can blend into the background.

1 Like

Please consider creating additional color options for your products. I.e., black, blue, red, etc. in addition to just the white offerings.

I searched here and it doesn’t seem like anyone is asking for some kind of cover for the cam that does not block shooting but does make the cam not look so much like a camera. isn’t the whole point to hide these? i have mine up in a corner of my apartment but if anyone were to look there, they’d see a camera. if there were a screen that snaps on and makes it look like a white cube, it could be anything, or at least not call attention to itself as a camera.

I just bought a cover for my cam pan that is coming today and it’s actually a like a sticker kind of thing and it kind of matches my kitchen cabinets so I’m gonna put it up on the top of the kitchen cabinets so to cover the kitchen the dining room and the living room I can plan it around. Once I get it on I will post a picture.

Try here. Have wraps for a ton of things including the cams.


Got my outdoor camera, but very hard to make hidden when it’s bright white. Camoflauge or something would be good.

In the posts above, there are third party suppliers listed for the V2. If they don’t already, I would imagine they will soon have them for the WCO.

That said, while Wyze may eventually make a black WCO, it is unlikely that they will produce any other colors or sell skins themselves. For the V2, the only think they have done is produce paper cutout templates. But those won’t work for the WCO as they aren’t waterproof.

Plasti dip to the rescue again.

Limited colors but it’s an optional skin that you can peel off anytime you want. It will work until something better comes along


1 Like

Wyze Color Options

White cabling is only good for white homes. Wyze would sell cables and skins in multiple colors to accomodate a variety of exterior colors.

[Mod Note]: Your request was merged to this topic for consistency in grouping similar requests. Please remember to scroll up to the top and click the VOTE button. You may also wish to comment on and/or vote for All Wyze products in both black and white and Want more beauty in products.

Cam-pan-V3 skin.

The PAN-V3 needs a skin similar to Jonny5.

Didn’t they partner with a popular sticker wrap company? The popular one I can’t think of the name of it but the one that did the MKBHD collab and had a playstation lawsuit

We probably will not do much with this right now with all the third-party choices that pop up quickly.

1 Like

I purchased multiple skins from slickwraps for 8 WCO v1s and two V3 that sit outside. I also thought the white color of the camera’s for my needs just brought to much attention to the camera’s (most sit at ground level spying on wildlife)

I purchased a WCO v2 later, and opted to go the duct tape route, after having seen this role of duct tape at Walmart.

The additional goal of this duct tape job was to put a ‘visor’ over the front of the camera to see if it would negate the morning dew fogging up the camera to where it was useless until the sun dried out the front of the lens:


For the back, I created a “Flap” that wraps under the camera and is held in place between the magnet of the base and the bottom of the camera, allowing easy access to charge when needed:



The front of the camera being camouflaged was not a concern for me as it faces down a hill will rarely a person ventures:


From all other angels, it is ‘camouflaged’

I supposed I could get creative and camo the front, but did not see the need to do so for my use of this camera