*** BLUE IRIS RTSP AUDIO SOLVED *** No more crashing when the audio is enabled.
I found the problem and a solution. For an unknown reason, the problem is that BI sets the registry Audio_Channels to 128, but it must be set to 1.
You need to change this option in Windows registry. This is a permanent solution. You only have to do this once, unless you add a new camera later. Here are the steps:
WARNING: BE CAREFUL WHEN MODIFYING REGISTRY, IF YOU DON’T KNOW WHAT YOU ARE DOING, DON’T TRY THIS.
1- Close Blue Iris if it’s not already done.
2- Run Windows Regitry Editor as admin and browse to the folder CAMERAS located at:
HKEY_LOCAL_MACHINE\SOFTWARE\Perspective Software\Blue Iris\Cameras
3- Just under, select the folder corresponding to your V3 cam name
4- In the right section, locate the option audio_channels (it should be set to 128 by default) , d ouble click on it and change the value from 80 to 1.
5- If you have more than one V3 cam, repeat steps 3 and 4 for each cam name.
6- Done! Start Blue Iris, enable the audio channel for each cameras and voilà, Félicitation!
Good luck and let me know if it worked for you too.
