Be careful with the extended USB cable especially connecting to Floodlight V1 USB auxiliary port. You might run into problems if the cable is too long.
I was previously running a 33 feet USB cable setup to power a V3 camera and it started acting weird. It will record fine for a few days and then it stops recording and I get “No video at the selected time” when I try to playback my SD recordings. The camera itself still functions fine except for recording (detection, siren, live view, & everything else still works). It is only until after restarting the camera does it start to record again, but then it stops after 2 to 3 days. In the end, I finally figured out it was my long 33 feet USB cable was causing the voltage to drop too low at a specific outdoor temperature (mainly on a sunny afternoon) so I used a separate 5V 2A power adapter plugged into an outdoor socket to fix it.