Events missing. Activity recorded

Events sometimes missing. Irregular recording of events. Sometimes, 1 to 4 hours activity missing from events.
The continuous recordings shows activity which do not appear under events.

Two VER 3 cams. Continuous recording. CAM PLUS, 80 % sensitivity. 256 SD

Attached shows one example of time periods missing in events.
Attached show one example of recordings of activity not appearing under events.
Usually, we have an abundance of activity plus an abundance of events showing.
Where why the missing. Events missing usually traffic activity.
Is



GroverH

Clear your selected event filters, refresh the list and recheck for your missing events.

In addition to what @Seapup posted go to settings and reset services. I have also had weird nights when I only get one or two events on 14 cameras :astonished: (Not likely).

Thanks Seapup and Antonius., and thanks for the pic.
I did as you both suggested plus clearing my memory and rebooting.
Unfortunately, the new results were no different than the old results, unless the changes means something to future results?

Resetting the services on the cameras will affect recording from that point forward. Adjusting the event tab filters will show more or less events that are recorded previously and will help show events in the future. For troubleshooting, I would remove all your filters and make sure that all videos are shown. Looks like you have the person, motion and specific cameras filter enabled at least.

1 Like

Am going to expand detection zone and see if that helps.
Thanks all for your responses.
GroverH

2 Likes