I’ve started having an issue that began about a week or to ago. Not sure if it related to recent updates but its unusual nature makes it seem like it is. Whenever my Wyze Cam restarts. It causes the Wyze bridge to not reboot properly. I have had my Camera with the bridge attached set up to automati…

[image] KellyS: Wouldn’t say they’re unreliable. They just have new products that released and updates can sometimes cause problems which may take a little time to fix. Assuming they are made aware of it. Computer software and electronics are never going to work 100% perfect and definitely you’r…

Why would someone restart their cam every day? I have never restarted mine unless it was forced too as part of an update. To that end, I do have a bridge and ousted of after a power failure, the bridge has not had any issues even after recent restarts due to software upgrades.

As a very patient person. I’ve not had very many problems out of it in the several months that I’ve used it up until recently when they released a new product and had some major updates. And what minor annoyances have transpired over the last several months. They were typically around the same time …

Why would you assume that something doesn’t fail occasionally? Have you ever owned a Wi-Fi device that didn’t reconnect properly after your Internet went down? That’s why I have a restart schedule. While every day probably is excessive. And I have since reduced it to only twice a week. When you need…

Firmware 4.9.6.160 (beta) seems to have fixed this.

I am having the same Issue with the bridges not coming up and having a solid orange light after rebooting the camera or power loss. Sensors are not showing offline, but are unresponsive. The bridge still shows up under device info and the firmware upgrade screen when the light is orange. Only physic…

I contacted customer support and they had me download beta firmware for the cameras (v2). Since doing that, all of the problems are resolved. You may want to try the same.

Thank you, I will try contacting support about this shortly then. It would also be nice to know when the fix will be out for general release as I do not like running beta firmware and software as a general rule.

Happy to help! I agree 100% with you. I’m really not big on beta software either. But in my case it actually fixed the problem. Good luck!

I did have this problem after a firmware upgrade. I will try to transfer my bridge to a camera that I excluded from the upgrades to avoid exactly these same scenario.

Camera not Restarting Bridge Properly

Power & Lighting

Customer August 17, 2020, 12:17pm 19

Here’s the post with a USB splitter cable to power the bridge independently.

Topic		Replies	Views
Wyzesense needs a daily reboot? Cameras troubleshooting	48	8515	February 15, 2021
Wyze Bridge keeps failing (light turns orange after some time) Power & Lighting not-platform-specific	4	1327	August 18, 2019
Wyze Bridges not working Sensors cam-v1-v2 , iphone-ipad , important , sense-v1	43	6562	April 29, 2022
Sensors Offline? Try this Sensors android , sense-v1	3	3836	August 3, 2020
Sensor bridge light not turning blu Power & Lighting	31	11273	January 11, 2020

Camera not Restarting Bridge Properly

Related topics