So we have had our Robot Vacuum since November 2020, it has been working great for almost three years. Now it no longer will return to charge, we have tried moving it to a new location, cleaned the contacts, reset the map, performed a full reset, but still having problems. Wyze support …

Is there a way to downgrade firmware?

Not officially. Otherwise, I do not know of anyone successfully replacing the firmware on a Wyze Robot Vacuum. Most recently I saw a method for un-bricking that involves copying the firmware from a working unit onto the broken unit. Sounds like the ability to do that has been patched-out in more rec…

Have you tried cleaning the LIDAR sensor? Use canned air to blow out the little hole on the side of the sensor

[image] b25pilot: Today it lost the map, I think it will clear the map and start over after something like 3 failed dock attempts.

I don’t think it immediately overwrites the saved map though? @b25pilot Open the multi-floor sidebar and check, if you have an additional floor, switching between them will force a reload. Normally need to do a full run and successful dock before it writes out the map.

Just showed-up on the “bricked” thread, but mentions “not going rogue anymore” with 1.6.202. [image] Firmware update from 1.6.113 to 1.6.199 bricked my vacuum?! Home This worked for me. 1) in the Wyze app on my phone, left the beta test group or whatever (I optionally ent…

Continues… [image] Robot Vacuum Motor Doesn't Start Home I haven’t been able to do a test run since my tear down, but I will clean the LiDAR sensor with air, the belt was still ok and it does spin.

Tried running manually, no luck see photo #1 [IMG_8903] Photo #2 is what it used to look like. [IMG_8904] Hoping WYZE has a firmware fix coming.

I’m trying to identify what it might be doing… I tried placing an object to block the LIDAR on top of the robot. It just caused it to bump into things more, but otherwise it continued doing the perimeter sweep like normal. The LIDAR has to compensate for those cover standoffs after-all. Response t…

Tried again today to use the vacuum it just seems to wander. [IMG_9017.jpg] [IMG_9018] Tried sending robot home, it just wanders and the charging station no longer shows in the map. I cleaned the IR sensors, is there a way to check if they are emitting? iPhone 13 camera filters IR light.

Robot Vacuum Not Charging

Home

purchark July 17, 2023, 2:28am 17

Just showed-up on the “bricked” thread, but mentions “not going rogue anymore” with 1.6.202.

Topic		Replies	Views
Wyze Robot Vacuum Recharge Services & Integrations support , not-platform-specific	36	3557	January 26, 2021
Vacuum needs many improvements Home not-platform-specific , robot-vacuum	20	1322	March 11, 2021
Wyze robot vacuum basically useless after latest update Home robot-vacuum	58	4907	July 9, 2024
Robot Vacuum dips off contacts while charging and shuts down Home robot-vacuum	31	2498	January 24, 2025
Wyze Vacuum gets lost and goes in circles Home robot-vacuum	16	3540	May 26, 2024

Robot Vacuum Not Charging

Related topics