Along with the timestamp, consider adding the ability to add a stamp equal to the camera name, as well as the TYPE of camera it is (v3, V2, WCO, VDB) (this would be good ‘advertising’ for when footage is posted to youtube, forums, etc)
Would you mind verifying that you indeed have the AI options on the Notifications screen for your V3s please? I have never had the individual AI notification options for my V3s or Pan V2s (only the Detects Wyze AI Events toggle). I DO have the options for my v2 and Pan V1s. I seem to remember that this was brought up before in another FIF.
the Images are for my V2. The V3 Firmware which was halted also provides the individual AI notifications. In any event, I am asking for consistency between Menu options and between Devices like iOS and Android. I test in both and see some differences and functionality or even layout.
Thank you for the reply. I did not bite on the now-halted v3 beta firmware, after what the v2 and Pan v1 beta firmware did to my cameras (still waiting for those fixes). Good to know though that the additional functionality will be in the V3s when the new firmware is released. I did vote for your post.
V3 Starlight Sensor: Image Brightness & Clarity and Light Levels required for Auto IR NV on\off have been significantly degraded by Firmware update(s)
There have been many reports in the forum of serious degradation in the quality of the V3 cam image, especially in IR NV, resulting from a recent Firmware update. The IR NV and Color NV are significantly darker than previously documented. Also, the image quality is very poor: grainy with excessive digital artifacts. Image quality in color daytime has also lost it’s previous clarity with many digital artifacts, motion trails, and skipping.
Reported and documented here:
The change in image brightness and quality coincides with a change in the light levels required for the V3 to Auto engage and disengage IR NV. Cams will switch into IR NV in very low light conditions, but will never disengage IR NV when light levels far exceed the threshold to engage it. Forcing a settings cycle (on\off\auto) back into Auto will return it to Color vision until the extreme low light engages IR NV again.
Wyze Cam Pan V1 assigned to CamPlus is only recording 11s or 12s Event Videos, cutting off Event Videos while active motion is occuring, and is not properly activating \ recording Person Detection events
This issue has been reported in the past with logs submitted, however it has been going on for some time without resolution. Just wanted to get it on the tracking list for Fix-it Friday.
If I have the Smart Detection for a specific AI toggled off, shouldn’t the Notifications toggle for that same AI also be off\disabled? I can’t think of a reason anyone would want\need to toggle these notifications if the CamPlus isn’t going to tag them. IMO, it creates some confusion being able to toggle the specific AI notifications on thinking that the Smart Detection settings are also on when they are not. Or, perhaps when turning on the Notification for that AI the Smart Detection is automatically enabled since that is required in order to get a notification?
The Sound Detection Notification setting, for example, will not activate unless the Sound Detection Event Recording toggle setting is on.
I am not sure if you are asking if or telling me that it is possible. Either way, no, it is not possible with the WCPV2. You can be notified of all AI events or none–there is no granularity, unlike with the WCPV1.