# Wyze sprinkler controller question

**URL:** <https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064>\
**Category:** Home\
**Tags:** troubleshooting, support, important, iphone-ipad\
**Created:** [November 18, 2020, 2:02pm UTC](https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064 "2020-11-18T14:02:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![blurryface7](https://avatars.discourse-cdn.com/v4/letter/b/c4cdca/32.png) [@blurryface7](https://forums.wyze.com/u/blurryface7)\
**Post date:** [November 18, 2020, 2:02pm UTC](https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064/1 "2020-11-18T14:02:47Z")

</div>

I have more than 8 zones on my sprinkler system. Is it possible to use two of these controllers ?

---

<div class="post-metadata">

**Author:** ![Ken.S](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/ken.s/32/232_2.png) [@Ken.S](https://forums.wyze.com/u/Ken.S)\
**Post date:** [November 18, 2020, 2:33pm UTC](https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064/2 "2020-11-18T14:33:33Z")

</div>

I see no reason why not, just wire the zones you want to each controller and set a schedule in each

---

<div class="post-metadata">

**Author:** ![darebuck](https://avatars.discourse-cdn.com/v4/letter/d/c37758/32.png) [@darebuck](https://forums.wyze.com/u/darebuck)\
**Post date:** [August 3, 2021, 6:53pm UTC](https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064/3 "2021-08-03T18:53:02Z")

</div>

Can someone tell me if I can run zone 1 and zone 2 at the same time? I want to put a main line control valve as zone 1 and the actual sprinklers as zone 2-8. So when I start watering I would run zone 1 for the duration of the watering and cycle through the other zones 2-8, then when finished turn off zone 1.

---

<div class="post-metadata">

**Author:** ![SergL](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@SergL](https://forums.wyze.com/u/SergL)\
**Post date:** [August 3, 2021, 8:50pm UTC](https://forums.wyze.com/t/wyze-sprinkler-controller-question/143064/4 "2021-08-03T20:50:48Z")

</div>

You cannot run more than 1x zone at a time, but the sprinkler controller does have a Main (M) connection for your use case. Simply connect the main valve to the M connection (all the way on the left, next to the first C connection) on the sprinkler controller and then in the system settings within the app for the controller indicate you are using a switched main valve.