# Wyze Sense plus Bulb (Color)

**URL:** <https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701>\
**Category:** Sensors\
**Tags:** support, iphone-ipad\
**Created:** [July 9, 2021, 1:32am UTC](https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701 "2021-07-09T01:32:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![matt17](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/matt17/32/43598_2.png) [@matt17](https://forums.wyze.com/u/matt17)\
**Post date:** [July 9, 2021, 1:32am UTC](https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701/1 "2021-07-09T01:32:50Z")

</div>

I have a wyze sense setup in my mud room to turn on/off my new color bulb. I’ve setup triggers: one to turn the light on when motion is sensed and then another to turn the light off after it hasn’t sensed motion for 1 minute. I also setup schedule from 8pm to 7am to make the light a night light at 25% brightness. When it’s during the scheduled time and motion is sensed, the bulb goes to full brightness and then when motion is clear, it turns off. How could I make it to where it goes to the previous percentage?

---

<div class="post-metadata">

**Author:** ![Earl.Automation](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/earl.automation/32/11005_2.png) [@Earl.Automation](https://forums.wyze.com/u/Earl.Automation)\
**Post date:** [July 9, 2021, 3:18am UTC](https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701/2 "2021-07-09T03:18:36Z")

</div>

Hello Matt17,

In your trigger, you will choose to “turn on the bulb” and “set brightness to 25%” and “Set color Temperature”. Which is 3 different actions. (see my Office example).

 ![Screenshot_20210708-231643](https://us1.discourse-cdn.com/wyze/original/3X/a/9/a9bcee491d59e018a2fe6291726dd6b66206da8b.png)

Hope that helps.

---

<div class="post-metadata">

**Author:** ![Earl.Automation](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/earl.automation/32/11005_2.png) [@Earl.Automation](https://forums.wyze.com/u/Earl.Automation)\
**Post date:** [July 9, 2021, 3:26am UTC](https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701/3 "2021-07-09T03:26:16Z")

</div>

I will add that I make a specific set of instructions for each window of time I want to control…

Schedule 1 - 12 am to 12 pm - do XYZ  
Schedule 2 - 12pm to 12 am - do ABC

You have to setup everything specifically for the time of day you want it to happen. If there is a gap in time, nothing will happen in the gap.

---

<div class="post-metadata">

**Author:** ![matt17](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/matt17/32/43598_2.png) [@matt17](https://forums.wyze.com/u/matt17)\
**Post date:** [July 10, 2021, 2:20am UTC](https://forums.wyze.com/t/wyze-sense-plus-bulb-color/188701/4 "2021-07-10T02:20:36Z")

</div>

Awesome. Thanks @Earl.Automation. That is what I needed to know. I wasn’t sure if I had to be that specific or if it would just go back to it’s previous state during a rule.
