Wyze Room Sensors - which are “active”

[spamoni]

I have additional Information to share on this now. You can find my post here:

Experience comfort in every room with Wyze Room Sensor - 5/3/22

Thanks @carverofchoice @Manmeyco , you are correct in the following: Auto Comfort Toggle On- Activates the Motion Sensing on the Remote Sensors to control the Temp. When Motion is sensed the more weight or Credence is placed on the Remote Sensor which sees the motion. I just learned that after about 30 minutes or so, if no activity is seen the system will move that sensor to the “Not Included” area until it sees motion again. Also, this setting will require you to pick which mode the sens…

In summary the following seems to be true and validated:

• Using Auto Comfort Control - Sensors Marked for Home and/or Sleep will automatically move into the Included Section when motion is sensed for use by the Algorithm. When Motion is inactive for 30 minutes, or so, the Sensor is moved back to the Not Included Section. So you will see Included sensors changing based on motion sensing.

• Auto Comfort Control is OFF- You will need to manually move the Sensors into the Included Section if you want them to be used in the Algorithm for Temp and Humidity. The system will not automatically add or remove and the Motion Detection on the Sensors do not play in the process. Those Sensors Not Included will remain excluded from the Calculation. This is a Manual Inclusion Process.

• In all Cases, the Main T-Stat will be included, hopefully Wyze will add the Functionality to remove the Main T-Stat from Temp and Humidity Calculations.

Took some time and testing to figure this out, please let me know if you have questions on this.

Feedback is always welcomed.