# Wyze Plug Outdoor & Sense Hub firmware Beta test 9/15/2021 **URL:** \ **Category:** Beta\ **Created:** [September 15, 2021, 6:56pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047 "2021-09-15T18:56:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![WyzeAndy](https://avatars.discourse-cdn.com/v4/letter/w/82dd89/32.png) [@WyzeAndy](https://forums.wyze.com/u/WyzeAndy)\ **Post date:** [September 15, 2021, 6:56pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/1 "2021-09-15T18:56:31Z")
PLUG OUTDOOR: version: **1.2.0.216** WHAT’S NEW: - Added a pop-up message when the connected WiFi strength is low to help users find a suitable location for their device - Added a status message during firmware update * * * SENSE HUB: version: **4.32.5.92** WHAT’S NEW: - Fixed a bug that caused some hubs to turn off immediately after the hub is unplugged from the power **[Mod Edit]:** _Removed embedded space from version numbers to enhance search clarity._ ---
**Author:** ![xx8todiefor6xx](https://avatars.discourse-cdn.com/v4/letter/x/e19adc/32.png) [@xx8todiefor6xx](https://forums.wyze.com/u/xx8todiefor6xx)\ **Post date:** [September 15, 2021, 8:47pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/2 "2021-09-15T20:47:14Z")
> [@WyzeAndy](#): > > bug that caused some hubs to turn off immediately after the hub is unplugged from the power That’s me!!! Thanks. Will verify issue is resolved. ---
**Author:** ![WyzeAndy](https://avatars.discourse-cdn.com/v4/letter/w/82dd89/32.png) [@WyzeAndy](https://forums.wyze.com/u/WyzeAndy)\ **Post date:** [September 15, 2021, 8:53pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/3 "2021-09-15T20:53:22Z")
Thank you! ---
**Author:** ![K6CCC](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/k6ccc/32/1591_2.png) [@K6CCC](https://forums.wyze.com/u/K6CCC)\ **Post date:** [September 15, 2021, 9:24pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/4 "2021-09-15T21:24:50Z")
As usual, the new firmware is not available yet. Both my outdoor outlets are showing current is 1.2.0.206 No update available. Tried from both my Android and #$%^& iPhone. Force stopped the app and tried again. Same result. Will try later… ---
**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\ **Post date:** [September 15, 2021, 10:28pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/5 "2021-09-15T22:28:47Z")
Plug Outdoor and HMS Hub firmware loaded fine from Android beta app 2.24.41. Outdoor Plug working well. Haven’t tested low WiFi strength though. HMS Hub working fine. Unplugged, plugged, unplugged, plugged… no change either way and no problems encountered. I’m not a good test candidate for this iteration, as I haven’t encountered the issue that was fixed prior to updating. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [September 15, 2021, 10:35pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/6 "2021-09-15T22:35:21Z")
Same here. Installed the FW without issues. Initial tests yielded no issues. As with @Seapup , I have not experienced the unplug issue which the HMS Hub FW update fixes. ---
**Author:** ![WildBill](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/wildbill/32/41408_2.png) [@WildBill](https://forums.wyze.com/u/WildBill)\ **Post date:** [September 15, 2021, 11:30pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/7 "2021-09-15T23:30:20Z")
Any plans to fix the “Tune Setting” problem? I assume this firmware doesn’t… ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [September 15, 2021, 11:39pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/8 "2021-09-15T23:39:38Z")
What issue are you having with the Tune Settings? Curious as I don’t recall having any issues. ---
**Author:** ![WildBill](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/wildbill/32/41408_2.png) [@WildBill](https://forums.wyze.com/u/WildBill)\ **Post date:** [September 15, 2021, 11:52pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/9 "2021-09-15T23:52:39Z")
All my sensors show “Tune” as off and I can’t really change them. If I change them to on and come back to check, they all show off again. I have two sensors where the Tune setting is on but the app shows them as off. ---
**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\ **Post date:** [September 15, 2021, 11:54pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/10 "2021-09-15T23:54:32Z")
You are using Android, correct? I will check mine and see. ``` EDIT ``` Just checked on my iOS, set my Garage Door tune to off as it is currently on. When I changed it, a loading message appeared and then disappeared when done. I left the screen and even closed the app. Went back in and looked and it was still off. I then turned it on and did the same thing, went back in and it was still on. Just found it. The issue is related to iOS only and not Android. This is why I was not able to reproduce. My Android device shows on and they Tune’s do sound. Then I go to iOS and they show off. ---
**Author:** ![R.Good](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/r.good/32/107078_2.png) [@R.Good](https://forums.wyze.com/u/R.Good)\ **Post date:** [September 16, 2021, 1:39am UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/11 "2021-09-16T01:39:38Z")
Updates installed flawlessly I had an issue where my Hub would not reconnect after an internet outage from the provider and had to reset. darndest thing. Never experienced the power issue. ---
**Author:** ![xx8todiefor6xx](https://avatars.discourse-cdn.com/v4/letter/x/e19adc/32.png) [@xx8todiefor6xx](https://forums.wyze.com/u/xx8todiefor6xx)\ **Post date:** [September 16, 2021, 2:47am UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/12 "2021-09-16T02:47:38Z")
Also had the same issue (AT&T Internet), I always thought it was my terrible internet provider. ---
**Author:** ![K6CCC](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/k6ccc/32/1591_2.png) [@K6CCC](https://forums.wyze.com/u/K6CCC)\ **Post date:** [September 16, 2021, 2:05pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/13 "2021-09-16T14:05:22Z")
Next day and still can’t get the update. Both Android and iPhone (both v2.24.41) still showing 1.2.0.206 as the current firmware version for my Outdoor outlets. ---
**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\ **Post date:** [September 16, 2021, 3:07pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/14 "2021-09-16T15:07:23Z")
When you go to Wyze app Home \> Account \> About \> Beta Program \> Edit, do you have Wyze Plug Outdoor checked? If yes, when you go to Wyze app Home \> Account \> About \> Beta Program, do you see Wyze Plug Outdoor in the list of Beta Programs you’re testing? ![Screenshot_20210916-105950_WyzeBeta](https://us1.discourse-cdn.com/wyze/original/3X/4/4/4499573b4ed88dabcff7a4359ce80240abefeea2.jpeg) ---
**Author:** ![R.Good](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/r.good/32/107078_2.png) [@R.Good](https://forums.wyze.com/u/R.Good)\ **Post date:** [September 16, 2021, 3:13pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/15 "2021-09-16T15:13:46Z")
I have also found that _if checked_ unchecking and rechecking those devices in that same menu gooses availability sometimes. ---
**Author:** ![K6CCC](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/k6ccc/32/1591_2.png) [@K6CCC](https://forums.wyze.com/u/K6CCC)\ **Post date:** [September 16, 2021, 3:34pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/16 "2021-09-16T15:34:09Z")
Yes @Seapup it was checked for all of my device types. Followed @R.Good suggestion and now the firmware update shows up for my Outdoor outlets. I have an Android phone, an Android tablet, and a #$%^& iPhone that all have Wyze beta installed. In my experience, when updates (either firmware or app versions) are announced here on the forum, it is frequently hours or days before the update becomes available to me. More of an issue with firmware updates, but sometime a couple months ago it took two or three days before an app version update actually showed up on all of them. ---
**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\ **Post date:** [September 16, 2021, 3:35pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/17 "2021-09-16T15:35:02Z")
👍 ---
**Author:** ![Stilkdog](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/stilkdog/32/23427_2.png) [@Stilkdog](https://forums.wyze.com/u/Stilkdog)\ **Post date:** [September 17, 2021, 2:22am UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/18 "2021-09-17T02:22:42Z")
Installed both just fine so far no issues. Both firmware updates showed up fine under android beta. ---
**Author:** ![Newshound](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/newshound/32/71715_2.png) [@Newshound](https://forums.wyze.com/u/Newshound)\ **Post date:** [September 17, 2021, 3:24am UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/19 "2021-09-17T03:24:28Z")
My Outdoor Plug update installed fine, but I can’t tell if the outlets are on or off. I just put my plug back in service a week or so ago. At that time I loaded the latest production firmware 1.2.0.206. I noticed if I stood next to the Plug the on/off controls/indicators on the Home screen did not necessarily reflect the state of the outlets. Nor did the controls/indicators in the plug-in. Further, the plug-in didn’t necessarily match the Home screen. I loaded this Beta firmware to see if that got fixed, and it didn’t. So I am here to report it. I am using iOS production app 4.24.52 & Beta firmware 1.2.0.216. Log in ticket #298064. Thanks! ---
**Author:** ![xx8todiefor6xx](https://avatars.discourse-cdn.com/v4/letter/x/e19adc/32.png) [@xx8todiefor6xx](https://forums.wyze.com/u/xx8todiefor6xx)\ **Post date:** [September 17, 2021, 4:23pm UTC](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047/20 "2021-09-17T16:23:29Z")
Tried unplugging my hub and it actually stayed on! Was starting to think my hub had faulty batteries. Thanks again!! [Next page](https://forums.wyze.com/t/wyze-plug-outdoor-sense-hub-firmware-beta-test-9-15-2021/196047.md?page=2)