# Wyze Outdoor Cam Hardware Issue

**URL:** <https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207>\
**Category:** Cameras\
**Tags:** cam-outdoor-v1, support, not-platform-specific\
**Created:** [February 4, 2021, 4:40pm UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207 "2021-02-04T16:40:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Birm](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/birm/32/34514_2.png) [@Birm](https://forums.wyze.com/u/Birm)\
**Post date:** [February 4, 2021, 4:40pm UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207/1 "2021-02-04T16:40:27Z")

</div>

So, have an outdoor cam, base is set up and works fine, connects fine, etc.

Every time I try and add WOC, I turn on camera (it’s been charging for days yet still flashing red LED, which seems to be a problem) I get a flashing blue light for a few seconds then it flashes yellow twice which is when I try to sync it/pair it to base station.

I do not ever get the “Pairing in Progress” or whatever message I am supposed to get and the base flashes blue/yellow quickly (looking for sync) but WOC has no lights whatsoever.

Seems to me like the device/hardware is bad on the camera? Any other suggestions?

Thanks.

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [February 5, 2021, 1:11am UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207/2 "2021-02-05T01:11:15Z")

</div>

Welcome to the Wyze community @Birm!  
Try flipping the little o/off switch on the back of the WCO off, then back on. Then try charging the camera. If that doesn’t work **you _may_ want to contact Wyze Customer Support about this issue!**  
By phone: (206) 339-9646 **Available Monday - Friday 5 am - 6 pm PT and Saturday 8 am - 4 pm PT**  
Or online: [Wyze.com/support](http://wyze.com/support)  
_phone support is typically faster however this isn’t always true due to fluctuation in the amount of calls._

---

<div class="post-metadata">

**Author:** ![Birm](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/birm/32/34514_2.png) [@Birm](https://forums.wyze.com/u/Birm)\
**Post date:** [February 5, 2021, 3:39pm UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207/3 "2021-02-05T15:39:39Z")

</div>

Thanks,

I’ve definitely tried both of those things, and camera was charging for two days before I tried to do this the last time, still no go and LED is _supposed_ to be solid red when fully-charged and yet never gets there.

I’m afraid I’ll probably have to hope for solid customer support/replacement device.

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [February 5, 2021, 3:45pm UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207/4 "2021-02-05T15:45:41Z")

</div>

Definitely contact support with the information above!

---

<div class="post-metadata">

**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\
**Post date:** [February 7, 2026, 3:23pm UTC](https://forums.wyze.com/t/wyze-outdoor-cam-hardware-issue/161207/5 "2026-02-07T15:23:27Z")

</div>

Closed on February 7, 2026, 3:23pm UTC

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
