# Wyze IFTTT and Smart Life Groups

**URL:** <https://forums.wyze.com/t/wyze-ifttt-and-smart-life-groups/91726>\
**Category:** Sensors\
**Tags:** not-platform-specific\
**Created:** [March 9, 2020, 4:10pm UTC](https://forums.wyze.com/t/wyze-ifttt-and-smart-life-groups/91726 "2020-03-09T16:10:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chuy](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/chuy/32/17232_2.png) [@Chuy](https://forums.wyze.com/u/Chuy)\
**Post date:** [March 9, 2020, 4:10pm UTC](https://forums.wyze.com/t/wyze-ifttt-and-smart-life-groups/91726/1 "2020-03-09T16:10:00Z")

</div>

Hello,  
Not sure if anyone has experienced this issue but I have several groups of lights in my smart life app. For example, 4 kitchen lights are under Group kitchen lights. Same for hallway and outside lights.

I set the motion sensor to turn on my group basement lights on motion and on clear, turn the group basement lights off. It was working well for a while. Then recently when the motion sensor clears, it turns off all group lights. I re configured it and the same thing happens. My only solution is to trigger for every specific light and not group. So far this work around is successful but very inefficient.

---

<div class="post-metadata">

**Author:** ![None](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@None](https://forums.wyze.com/u/None)\
**Post date:** [March 9, 2020, 4:32pm UTC](https://forums.wyze.com/t/wyze-ifttt-and-smart-life-groups/91726/2 "2020-03-09T16:32:25Z")

</div>

Unless I misunderstand, this sounds like an IFTTT to Smart Life service issue.

The Wyze motion sensor is just a trigger (That) to IFTTT. It doesn’t have any control of what IFTTT does after IFTTT gets the trigger.

---

<div class="post-metadata">

**Author:** ![paindonthurt](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/paindonthurt/32/14342_2.png) [@paindonthurt](https://forums.wyze.com/u/paindonthurt)\
**Post date:** [March 9, 2020, 5:31pm UTC](https://forums.wyze.com/t/wyze-ifttt-and-smart-life-groups/91726/3 "2020-03-09T17:31:00Z")

</div>

Agree with @None. I have currently three motion detectors each running a schedule with various amounts of lights in each schedule and I’ve had no issues with them not working. The only issue I had was one motion detector is outside and the battery went dead. Replaced the battery and everything was fine.
