# Wyze firmware updates - Released 11/6/2023 **URL:** \ **Category:** Wyze News\ **Created:** [November 6, 2023, 7:15pm UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247 "2023-11-06T19:15:06Z")\ **Posts on this page:** 5\ **Page:** 2
**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\ **Post date:** [November 9, 2023, 2:11am UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247/21 "2023-11-09T02:11:14Z")
**WCO firmware update of 11/06/2023 for cams using Cam Plus** I updated my 4 Version One WCO cams and base yesterday 11/7/23. I am using cam plus on all four cams and had them set to “No Cooldown” period. I checked the settings today and they were all set at 1 Minute Cooldown.? I recommend you check your setting on the WCO and see if anything has changed from your original settings. 🦝 **[Mod Note]:** _Your topic and associated replies were merged for better visibility to Wyze and the potentially affected forum members._ ---
**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\ **Post date:** [November 9, 2023, 3:21am UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247/22 "2023-11-09T03:21:53Z")
> [@Antonius](#): > > I updated my 4 Version One WCO cams and base yesterday Updated to which firmware version and using which app version? Cooldown is whacked all over the place on my WCOv1 cams running 4.17.4.427 and WCOv2 cams running 4.48.4.427 using app version 2.47.0 (b372). Thank you for the heads up! 👍 ---
**Author:** ![Antonius](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/antonius/32/106761_2.png) [@Antonius](https://forums.wyze.com/u/Antonius)\ **Post date:** [November 9, 2023, 1:04pm UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247/23 "2023-11-09T13:04:32Z")
> [@Seapup](#): > > Updated to which firmware version and using which app version? I use iOS firmware 4.17.4.427 and app 2.46.1 (4). I noticed that goofy green tagging box was on also, which I normally have turned off. ---
**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\ **Post date:** [November 9, 2023, 1:17pm UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247/24 "2023-11-09T13:17:14Z")
Seems to be a sometimes recurring issue when applying firmware updates. 🫤 I moved your topic and replies to this Wyze firmware update announcement topic for better visibility to Wyze and the potentially affected users. ---
**Author:** ![peepeep](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/peepeep/32/107148_2.png) [@peepeep](https://forums.wyze.com/u/peepeep)\ **Post date:** [November 30, 2023, 6:50pm UTC](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247/25 "2023-11-30T18:50:08Z")
Updated two Cam v2… observed a few days. Then updated remaining six. Like this: > [@V3 cams bricked by firmware update](https://forums.wyze.com/t/v3-cams-bricked-by-firmware-update/281875/30): > > Note I say Failed Updates rather than Bad Firmware. The update process is failing, not the new Firmware versions. I have successfully updated all 16 of my V3 cams to every Beta Firmware and Production Firmware version releases since installing them oh so many moons ago. I have yet to experience a failed update or the need to flash a cam to recover it, on any model I own. > > But, I do it **one single cam at a time** and I am running my IoT on a rock solid, 100% connectivity uptime, 4 node Mesh. All good. 👍 [Previous page](https://forums.wyze.com/t/wyze-firmware-updates-released-11-6-2023/280247.md?page=1)