Wyze Firmware Updates - 2/2/2026

[Crease]

I didn’t suggest the use of docker-wyze-bridge or other hacks. You mentioned that you had enabled RTSP on Cam v3 but were unable to stream video into VLC or Blue Iris, so I was suggesting other topics where this has been discussed and where other users have shared suggestions for successful streaming.

[bobradarbob]

Sorry I am not a good candidate to help with data etc. from my v2 and v3 pans They are 15 feet up on poles. I did beging to have the SD card issues once the firmware update was installed but NOT before the update. The V2 is inside an out building but the others are just not easy to access.

Bob

[TheWaterbug]

I installed the latest (4.36.16.7064) update:

and I’m stuck again unable to proceed past the disabling of RSTPS. The Accept button is not visible, and I can’t scroll to it:

all despite my default text size is set to normal:

I cannot get VLC or Blue Iris to pull RTSP from it, even if enter rtsps:// in VLC:

or set Blue Iris to port 322. There is a Wyze: V3 RTSP model-specific option in BI, but it doesn’t work even if I change the default stream path from /live to /stream0:

but no explicit rtsps option in the drop-down:

[Crease]

@TheWaterbug

The Accept button is not visible, and I can’t scroll to it:

Have you tried using a different device? I don’t use iOS, but even on Android I’ve found that different OS versions on different devices do not always display certain screens within the Wyze app the same way, which I suspect is due to screen geometry and other factors (and probably not correctly coding during development to account for the differences). If I were you, then I’d be inclined to submit a log from the app and then post about this with your Log ID in the Wyze News (or Beta) topic that corresponds to whatever version of the app you’re using and include details about exactly which app, device(s), and iOS version(s) you’re using, because I suspect this is something they might need to fix within the app, and engaging in a more current topic might be a better way to get visibility back to Wyze.

@TheWaterbug

I installed the latest (4.36.16.7064) update

If you think the issue is with that firmware update itself (rather than the app), then you could also post to the topic for that version:

@WyzeJasonJ

Wyze Cam v3 Firmware:

Version: 4.36.16.7064

@TheWaterbug

I cannot get VLC or Blue Iris to pull RTSP from it, even if enter rtsps:// in VLC:

As far as I’m aware, RTSPS is not supported in VLC, as I mentioned above:

@Crease

I have not been able to get VLC to connect via RTSPS to Cam Pan v3, and the 3rd Party Software Compatibility table in the RTSP Testing Instructions indicates that this is not supported. RTSP should work if you can get your Cam switched to that mode, however, and that has been my experience.

[TheWaterbug]

I got it working. More details here:

RTSP for v3 and Pan v3

Wow!!! Waiting a few minutes before clicking Accept was the fix!! I now have RTSPS disabled (finally) so it’s just running plain RTSP. VLC was connecting, but BlueIris wouldn’t but after fiddling with some settings and restarting the camera, it’s working. Here’s my BI config for this camera: [image] I FINALLY have my v3 camera working in Blue Iris, without Docker-Wyze-Bridge, and with the garage door opener accessory also working via the Wyze app.

[chenjie]

Any updates on the Pan v2 RTSP support?