# Wyze Doorbell Dimensions

**URL:** <https://forums.wyze.com/t/wyze-doorbell-dimensions/201782>\
**Category:** Cameras\
**Tags:** video-doorbell-v1\
**Created:** [November 9, 2021, 12:25am UTC](https://forums.wyze.com/t/wyze-doorbell-dimensions/201782 "2021-11-09T00:25:43Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![bryonhu](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/bryonhu/32/122736_2.png) [@bryonhu](https://forums.wyze.com/u/bryonhu)\
**Post date:** [November 9, 2021, 9:34pm UTC](https://forums.wyze.com/t/wyze-doorbell-dimensions/201782/10 "2021-11-09T21:34:41Z")

</div>

Well my systems are a bit extreme and not for the average hobbyist / user so first I will suggest these posts. and below that I will show what I use…

**As far as USB wall adapters I do not know which are best as I do not use them in my setups, you may want to review high-quality USB adapters on the internet.**

These posts are very informative as to power cycling power devices: (Note the blue lettering are links to those posts, Click the Blue Lettering links to go to them)

[Plan Ahead so you can Restart a stalled Wyze Camera](https://forums.wyze.com/t/plan-ahead-so-you-can-restart-a-stalled-wyze-camera/195121)

[Adding a built-in feature to Wyze cameras](https://forums.wyze.com/t/adding-a-built-in-feature-to-wyze-cameras/197041)

And there are plenty more remote powering solutions in this forum which you could use the “Magnifying Glass” Icon top of page to perform the searches…

**\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_**

Now I will give the info to my much more complex powering setups which most hobbyists / users likely won’t want to build.

[Battery Backed-Up 14 V3 cams and Internet Communications](https://forums.wyze.com/t/battery-backed-up-14-v3-cams-and-internet-communications/181545) \<— Main Powering source replaces USB adapters for most of system except remote Solar powered cameras  
.  
.  
This what I use but it is “Way Over The Top” for your needs of power cycling ❗  
[**IP-P4** Professional 4-Port Remote Power Switch - Phone Control + Web Control](http://www.ambery.com/ip-p4.html)

And I have also heavily modified mine to run on 12 volts as my system is 12 volt based for cams and internet.

Modified for 12 volt DC control IP-P4 picture below:

 ![12volt IP-P4](https://us1.discourse-cdn.com/wyze/original/3X/d/1/d19236b305bfd111732fe0fbad3a2ca78a64674f.jpeg) [MODS?] Note forum rotated picture on upload for some odd reason, download and rotate if needed for better visibility.

It allows me to control 3 banks of multiple cameras per bank and also be able to reset internet if down through landline telephone.

**\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_**

[Solar panel AND battery for Wyze Cam 3](https://forums.wyze.com/t/solar-panel-and-battery-for-wyze-cam-3/200950/8)  
Note the solar setup has a WiFi interface not shown in picture that also allows me to cycle the load connected to solar controller. I pulled it out of picture as to not show it for less complexity in that post, you can see the wires hanging out of enclosure that connects to those devices.

**\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_**

Note my powering and control systems used to run older security cameras of lower resolution that were later replaced with Wyze Cams V2, Pan-Cam, and later V3’s when they came out.

The Powering and control systems have more $$$$ invested in them than the Wyze Cameras do ❗

---

_[View the full topic](https://forums.wyze.com/t/wyze-doorbell-dimensions/201782)._