# Wyze Cam v4 - Released 3/26/2024

**URL:** <https://forums.wyze.com/t/wyze-cam-v4-released-3-26-2024/294271>\
**Category:** Wyze News\
**Tags:** cam-v4\
**Created:** [March 26, 2024, 2:08pm UTC](https://forums.wyze.com/t/wyze-cam-v4-released-3-26-2024/294271 "2024-03-26T14:08:12Z")\
**Posts on this page:** 1\
**Showing post:** 161

<div class="post-metadata">

**Author:** ![Crease](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/crease/32/123254_2.png) [@Crease](https://forums.wyze.com/u/Crease)\
**Post date:** [June 15, 2024, 9:57pm UTC](https://forums.wyze.com/t/wyze-cam-v4-released-3-26-2024/294271/161 "2024-06-15T21:57:27Z")

</div>

> [@Crease](#):
>
> Does Edge AI Person Detection on Cam v4 actually work without a subscription?

In my limited experience with my first new Cam v4 so far today, the answer is “no”.

> [@carverofchoice](#):
>
> I can say that on the V3Pro, the Edge AI is Free and it will label videos as person detected, but last I personally checked, it had a highly CRITICAL flaw of not allowing you to get NOTIFICATIONS for person detection, just be able to sort for them after the fact. 👎

I’m getting neither notifications nor “person detected” tagging in the timeline on the Cam v4 (at least so far), so that part of the experience is getting a 👎 from me, too.

@carverofchoice, is there some kind of setting for the Cam v3 Pro that a user needs to enable in order to get this feature to work, even if it’s just the correct event tagging? I’m not seeing anything like that in the settings for the Cam v4, and if I try to ✅ “TAG” or “NOTIFY” on the Customize Detections screen for “Person”, then the app prompts me to get Cam Plus. That’s perfectly reasonable if the individual detection-type settings on that screen are all tied to Wyze’s Cloud AI, and it makes me suspect that the Edge AI is supposed to be enabled automagically. Is that the correct expectation?

I also see this when I navigate to the **Events** tab and filter to just the Cam v4:

 ![image](https://us1.discourse-cdn.com/wyze/original/3X/8/3/83238c4d95ff270d1ccf8cc15f7a8570f767ff92.png)

If I tap on **Person** , I get another prompt to subscribe to Cam Plus. So far the message I’m getting seems to be that Person Detection isn’t actually “free” with Cam v4, and that message seems to contradict what Wyze says in various Support articles ([as noted above](https://forums.wyze.com/t/wyze-cam-v4-released-3-26-2024/294271/156)) as well as what a Wyze employee indicated in another topic.\[1\]\[2\] (I guess I’ll be going back to that topic to request clarification…_again_. 😞)

So far I’ve set up the camera in several different places (thinking maybe it was a lighting or distance-to-camera issue) that have allowed me to walk toward the camera or laterally, but it’s still generating only generic motion notifications and events. The firmware is updated, I’ve restarted the camera several times, and “Reset Services” has no apparent effect.

Is it possible that I’m not actually a person? 🤔

* * *

1. 

> [@Not Continuing Cam Plus Lite is a bait and switch](https://forums.wyze.com/t/not-continuing-cam-plus-lite-is-a-bait-and-switch/294299/8):
>
> This is actually correct.

2. 

> [@Not Continuing Cam Plus Lite is a bait and switch](https://forums.wyze.com/t/not-continuing-cam-plus-lite-is-a-bait-and-switch/294299/20):
>
> On-device person detection does generate the same notifications. and you bet slight_smile

---

_[View the full topic](https://forums.wyze.com/t/wyze-cam-v4-released-3-26-2024/294271)._
