# Wyze Cam v3 & Pan v2 Firmware Beta Test 12/13/2022

**URL:** <https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167>\
**Category:** Beta\
**Created:** [December 13, 2022, 9:23pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167 "2022-12-13T21:23:37Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![WyzeAndy](https://avatars.discourse-cdn.com/v4/letter/w/82dd89/32.png) [@WyzeAndy](https://forums.wyze.com/u/WyzeAndy)\
**Post date:** [December 13, 2022, 9:23pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/1 "2022-12-13T21:23:37Z")

</div>

**Wyze Cam v3 :**

Version: **4.36.10.3406**

##### WHAT’S NEW:

- Improved Event Video recording stability

- _ **Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.36.9.139 or below.** _

* * *

**Wyze Cam Pan v2 :**

Version: **4.49.3.3406**

##### WHAT’S NEW:

- Improved Event Video recording stability

- _ **Due to the security improvement on this firmware, you will need to go through the factory reset process for your camera if you go back to firmware 4.49.1.47 or below.** _

**[Mod Edit]:** _Removed embedded space from version numbers to enhance search clarity._

---

<div class="post-metadata">

**Author:** ![Seapup](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/seapup/32/118966_2.png) [@Seapup](https://forums.wyze.com/u/Seapup)\
**Post date:** [December 13, 2022, 9:53pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/2 "2022-12-13T21:53:46Z")

</div>

Updated a mess of Cam v3 and Pan Cam v2 cams via Device Info\>Firmware Version and Bulk Update methods with no issues. Cams are running well so far. Will chime in with issues and logs if any encountered.

Edit: Also successfully updated 2 v3 cams via popup that occurs when entering live stream.

---

<div class="post-metadata">

**Author:** ![IEatBeans](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/ieatbeans/32/33378_2.png) [@IEatBeans](https://forums.wyze.com/u/IEatBeans)\
**Post date:** [December 13, 2022, 10:30pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/3 "2022-12-13T22:30:50Z")

</div>

Updated a bunch of v3s on a few diffrent versions. All were quick, and some were from bulk update and others were from the popup

---

<div class="post-metadata">

**Author:** ![Stiv](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/stiv/32/4089_2.png) [@Stiv](https://forums.wyze.com/u/Stiv)\
**Post date:** [December 13, 2022, 10:41pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/4 "2022-12-13T22:41:27Z")

</div>

Did a bulk update on all of my cameras without any issues. Testing now.

---

<div class="post-metadata">

**Author:** ![UserCustomerGwen](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/usercustomergwen/32/75644_2.png) [@UserCustomerGwen](https://forums.wyze.com/u/UserCustomerGwen)\
**Post date:** [December 13, 2022, 10:54pm UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/5 "2022-12-13T22:54:06Z")

</div>

Pinned on December 13, 2022, 10:54pm UTC



---

<div class="post-metadata">

**Author:** ![XKaliber](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/xkaliber/32/25813_2.png) [@XKaliber](https://forums.wyze.com/u/XKaliber)\
**Post date:** [December 14, 2022, 1:12am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/6 "2022-12-14T01:12:33Z")

</div>

100% success with bulk firmware update on all v3’s. 🤭

---

<div class="post-metadata">

**Author:** ![SlabSlayer](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@SlabSlayer](https://forums.wyze.com/u/SlabSlayer)\
**Post date:** [December 14, 2022, 1:19am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/7 "2022-12-14T01:19:32Z")

</div>

Updated all cams on prior Beta via bulk page. Will monitor for changes.

---

<div class="post-metadata">

**Author:** ![winksj](https://avatars.discourse-cdn.com/v4/letter/w/7ea924/32.png) [@winksj](https://forums.wyze.com/u/winksj)\
**Post date:** [December 14, 2022, 1:23am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/8 "2022-12-14T01:23:15Z")

</div>

All cams updated via bulk update without any problems and in fact finished very quickly compared to the previous update. I report back with any issues should I find any.

EDIT: I also wanted to comment on the new event AI recording options that were available in previous releases. Allowing you to only record events using smart AI detection rather than all motion events is an excellent & valuable feature to have and much appreciated as it cuts down a lot on the number of recordings and notifications I get. In a nutshell, it’s great to be able to only record what types of events you are interested in.

---

<div class="post-metadata">

**Author:** ![winksj](https://avatars.discourse-cdn.com/v4/letter/w/7ea924/32.png) [@winksj](https://forums.wyze.com/u/winksj)\
**Post date:** [December 14, 2022, 1:32am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/9 "2022-12-14T01:32:58Z")

</div>

I’m not sure if this is a firmware issue or an application issue but the smart vision feature does not bring up any of my cameras even though they are and I am a cam Plus subscriber so as far as I know I meet the criteria but I’m not able to test that feature out because there are no cameras for me to select when it comes to that option.

If anyone has any insight as to why that might be I would appreciate any info you may have. Thank you!

---

<div class="post-metadata">

**Author:** ![XKaliber](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/xkaliber/32/25813_2.png) [@XKaliber](https://forums.wyze.com/u/XKaliber)\
**Post date:** [December 14, 2022, 1:36am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/10 "2022-12-14T01:36:04Z")

</div>

> [@winksj](#):
>
> EDIT: I also wanted to comment on the new event AI recording options that were available in previous releases. Allowing you to only record events using smart AI detection rather than all motion events is an excellent & valuable feature to have and much appreciated as it cuts down a lot on the number of recordings and notifications I get. In a nutshell, it’s great to be able to only record what types of events you are interested in.

It is indeed, I’d love to switch mine to AI record-only, however, I have issues with the accuracy of it (AI detection), with many ‘types’ of movements only classified as MOTION, so I’d end up losing a lot of necessary footage. Yes, I could always go back to SD card, but that would require me to _know_ about it, which wouldn’t be the case if it wasn’t recorded.

---

<div class="post-metadata">

**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\
**Post date:** [December 14, 2022, 1:37am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/11 "2022-12-14T01:37:36Z")

</div>

As with everyone else, all of mine updated without issues.

---

<div class="post-metadata">

**Author:** ![winksj](https://avatars.discourse-cdn.com/v4/letter/w/7ea924/32.png) [@winksj](https://forums.wyze.com/u/winksj)\
**Post date:** [December 14, 2022, 1:41am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/12 "2022-12-14T01:41:42Z")

</div>

Thanks for bringing that to my attention because I hadn’t considered that I was losing or possibly losing important events with people that are being classified as “motion” and therefore not recorded. I will have to test that a bit further but when I walked in front of it it works every time but it certainly possible that other people might be on the fine line between it knowing what’s motion versus people,.

---

<div class="post-metadata">

**Author:** ![Use\_less](https://avatars.discourse-cdn.com/v4/letter/u/46a35a/32.png) [@Use\_less](https://forums.wyze.com/u/Use_less)\
**Post date:** [December 14, 2022, 1:56am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/13 "2022-12-14T01:56:00Z")

</div>

Cam 3 failed to update to 4.36.10.3406 after several attempts but finally did after about an hour

---

<div class="post-metadata">

**Author:** ![StevenA](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/stevena/32/98871_2.png) [@StevenA](https://forums.wyze.com/u/StevenA)\
**Post date:** [December 14, 2022, 2:21am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/14 "2022-12-14T02:21:39Z")

</div>

Winksj, my v3 will sometimes mis-classify people across my street as motion. Very accurate at classifying people on my side of the street as Person. You might test walking at the outer edge of your detection zone if that is a concern for you.

---

<div class="post-metadata">

**Author:** ![SlabSlayer](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@SlabSlayer](https://forums.wyze.com/u/SlabSlayer)\
**Post date:** [December 14, 2022, 2:31am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/15 "2022-12-14T02:31:21Z")

</div>

> [@winksj](#):
>
> the smart vision feature does not bring up any of my cameras even though they are and I am a cam Plus subscriber

I believe this feature is still in open Beta development and is still only available to be tested on V2 Cams.

> [@Smart Vision Open Beta Feedbacks Thread](https://forums.wyze.com/t/smart-vision-open-beta-feedbacks-thread/246217):
>
> Hello! This is Mengting, and I am a Product Manager for Smart Vision! Thank you so much for trying out our Smart Vision v0.2. We are super excited to introduce you to this new version, as many important changes have been made possible by the hard work of our dev team and previous beta users clap . However, as we are marching our baby steps, we know the current product is far from being perfect - and we really need your help on catching experiences that aren’t right for you, any bugs or crashe…

> [@Smart Vision Open Beta Feedbacks Thread](https://forums.wyze.com/t/smart-vision-open-beta-feedbacks-thread/246217/96):
>
> There are several things needed to participate in this test: V2 cameras, 2.36 APP, latest FW for cam-v2, and CamPlus/CamPlus Pro. I should’ve made the information clearer! Have added them to the testing manual.

---

<div class="post-metadata">

**Author:** ![XKaliber](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/xkaliber/32/25813_2.png) [@XKaliber](https://forums.wyze.com/u/XKaliber)\
**Post date:** [December 14, 2022, 2:35am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/16 "2022-12-14T02:35:14Z")

</div>

> [@winksj](#):
>
> Thanks for bringing that to my attention because I hadn’t considered that I was losing or possibly losing important events with people that are being classified as “motion” and therefore not recorded. I will have to test that a bit further but when I walked in front of it it works every time but it certainly possible that other people might be on the fine line between it knowing what’s motion versus people,.

Well, I can definitely tell you that even such an obvious-moving vehicular object such as this was classified only as MOTION…

---

<div class="post-metadata">

**Author:** ![CrashOD](https://avatars.discourse-cdn.com/v4/letter/c/bbe5ce/32.png) [@CrashOD](https://forums.wyze.com/u/CrashOD)\
**Post date:** [December 14, 2022, 5:48am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/17 "2022-12-14T05:48:53Z")

</div>

Bulk update no issues. All Camaras open up to view

---

<div class="post-metadata">

**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\
**Post date:** [December 14, 2022, 9:46am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/18 "2022-12-14T09:46:04Z")

</div>

Do you have vehicle selected as an option in Event Recording?

---

<div class="post-metadata">

**Author:** ![shaneoss](https://avatars.discourse-cdn.com/v4/letter/s/8edcca/32.png) [@shaneoss](https://forums.wyze.com/u/shaneoss)\
**Post date:** [December 14, 2022, 11:24am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/19 "2022-12-14T11:24:08Z")

</div>

Can we flash version this manually too? Is there a link for it?

---

<div class="post-metadata">

**Author:** ![SlabSlayer](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@SlabSlayer](https://forums.wyze.com/u/SlabSlayer)\
**Post date:** [December 14, 2022, 11:39am UTC](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167/20 "2022-12-14T11:39:44Z")

</div>

#### Welcome to the Wyze User Community Forum @shaneoss!

No. Beta Firmware is not available for download and manual flash update. In order to get Beta Firmware updates, you need to be a Beta Tester.

[https://support.wyze.com/hc/en-us/articles/360032458951-Become-a-Beta-Tester](https://support.wyze.com/hc/en-us/articles/360032458951-Become-a-Beta-Tester)

[Next page](https://forums.wyze.com/t/wyze-cam-v3-pan-v2-firmware-beta-test-12-13-2022/251167.md?page=2)
