# Wyze Cam Pan moving on it’s own

**URL:** <https://forums.wyze.com/t/wyze-cam-pan-moving-on-it-s-own/41384>\
**Category:** Cameras\
**Tags:** iphone-ipad\
**Created:** [July 2, 2019, 6:48pm UTC](https://forums.wyze.com/t/wyze-cam-pan-moving-on-it-s-own/41384 "2019-07-02T18:48:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kkerregan](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@kkerregan](https://forums.wyze.com/u/kkerregan)\
**Post date:** [July 2, 2019, 6:48pm UTC](https://forums.wyze.com/t/wyze-cam-pan-moving-on-it-s-own/41384/1 "2019-07-02T18:48:13Z")

</div>

So I’ve been having an issue with the Wyze Cam Pan. It started months ago, I’ve tried resetting the camera, to no avail. The problem is, whenever I set the motion detection zone, about a day later, the camera will have turned either to the left or right a little. I will reset the detection zone, and it keeps happening. I’m not sure if this is an issue with software, or just my camera. I do have the camera mounted outside, protected by a rubber case and an eve. Not sure if that is related to my issue.

---

<div class="post-metadata">

**Author:** ![blackhawkatlaser](https://avatars.discourse-cdn.com/v4/letter/b/e5b9ba/32.png) [@blackhawkatlaser](https://forums.wyze.com/u/blackhawkatlaser)\
**Post date:** [July 2, 2019, 9:22pm UTC](https://forums.wyze.com/t/wyze-cam-pan-moving-on-it-s-own/41384/2 "2019-07-02T21:22:04Z")

</div>

I have the same issue on a pan cam in my kitchen. It seems to reset (power cycle) itself every 2-4 days, and never returns to the original focal point.

At first I thought it was a bad PSU, so I replaced with my other pan cam’s PSU. No change. Reset the camera and installed latest firmware. No difference.

I’m thinking it may be some sort of bug/glitch with pan cam, cause now my other pan is doing the same thing.
