# Wyze Base Station blue light flashing

**URL:** <https://forums.wyze.com/t/wyze-base-station-blue-light-flashing/193867>\
**Category:** Cameras\
**Tags:** cam-outdoor-v1\
**Created:** [August 24, 2021, 5:57pm UTC](https://forums.wyze.com/t/wyze-base-station-blue-light-flashing/193867 "2021-08-24T17:57:55Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![manmatt75](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@manmatt75](https://forums.wyze.com/u/manmatt75)\
**Post date:** [August 30, 2021, 7:12pm UTC](https://forums.wyze.com/t/wyze-base-station-blue-light-flashing/193867/10 "2021-08-30T19:12:05Z")

</div>

After 2 weeks of the flashing blue light, I got mine to reconnect. These are the steps I did.

1. Downloaded the JULY firmware to a SD card using the directions from here: [https://support.wyze.com/hc/en-us/articles/360057688071-How-to-flash-your-Wyze-Cam-Outdoor-firmware-manually](https://support.wyze.com/hc/en-us/articles/360057688071-How-to-flash-your-Wyze-Cam-Outdoor-firmware-manually)
2. With the base station plugged into the router using an ethernet cable, unplug the power cable, insert the SD card, and plug the power cable back in. I got a solid yellow light and after about 30 seconds, the flashing blue light returned.
3. After a minute or two, I used a paper clip to hold the reset button until the light turned a solid yellow. Then release the rest button. After a minute or so, it reconnected. Once it reconnects, remove the SD card.
4. I had to reconnect the camera back to the base station, but both are now working again.

Hope this helps.

---

_[View the full topic](https://forums.wyze.com/t/wyze-base-station-blue-light-flashing/193867)._