# V3 problem - Mesh

**URL:** <https://forums.wyze.com/t/v3-problem-mesh/178923>\
**Category:** Services & Integrations\
**Tags:** cam-v1-v2, important, android-and-ios\
**Created:** [April 30, 2021, 11:31pm UTC](https://forums.wyze.com/t/v3-problem-mesh/178923 "2021-04-30T23:31:24Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![spamoni](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/spamoni/32/34695_2.png) [@spamoni](https://forums.wyze.com/u/spamoni)\
**Post date:** [May 1, 2021, 11:13am UTC](https://forums.wyze.com/t/v3-problem-mesh/178923/5 "2021-05-01T11:13:29Z")

</div>

I use the TPLink Deco X60 and they are performing well. I had the Deco P7’s before which has had an issue. I could never maintain a constant stream or Alerts with the P7’s.

I have found the following has helped and seemed to have corrected most issues, I still have a couple posted. On my Mesh Network I had to turn off Beamforming. Everytime I turned that on, my Camera’s would start having some issues. In additiont to that, I set the camera’s with High Priority on my Mesh Network, I do have the option to set my network for streaming, but have not tried that yet. I also made sure that the Camera’s IPs were reserved for those cameras. Not that this made a difference, but I was trouble shooting then.

I have also joined the Beta group and testing the latest Firmware and Beta App. I will say that I have noticed marked improvements with the Beta releases as well. But there is a risk to that. But to me the risk is minimal and I always like to know what is coming. Here is the steps if you are interested in doing this:

> [@2.20 iOS beta app hotfix & Wyze Robot Vacuum Firmware Beta Test 4/28/2021](https://forums.wyze.com/t/2-20-ios-beta-app-hotfix-wyze-robot-vacuum-firmware-beta-test-4-28-2021/178435/15):
>
> You will first need to subscribe to be a Beta Tester. Go here for that: [Become a Beta Tester](https://wyze.com/become-a-beta-tester) and install the Beta App.
> 
> Once loaded:
> 
> - start the app and go to Account tab
> - Tap on the About Menu Choice
> - Tap on Beta Program
> - Tap Edit in the top Right
> - Then Select the Devices you want the Beta Firmware for, or select all. I select all.
> 
> Once this is done you can go back to the Account Tab and tap on Firmware Update and see what is availabale.
> 
> You should note that some times you will need to go to the Device and check via the Device directly.

---

_[View the full topic](https://forums.wyze.com/t/v3-problem-mesh/178923)._