# Sprinkler Controller **URL:** \ **Category:** Home\ **Tags:** not-platform-specific\ **Created:** [November 17, 2020, 10:56pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942 "2020-11-17T22:56:48Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Jagi](https://avatars.discourse-cdn.com/v4/letter/j/a8b319/32.png) [@Jagi](https://forums.wyze.com/u/Jagi)\ **Post date:** [November 17, 2020, 10:56pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/1 "2020-11-17T22:56:48Z")
I just pre-ordered the Wyze sprinkler controller. Can I see the manual for the DIY instructions to plug it into my existing system? I am new so excuse me if I posted this the wrong way. I am actually trying to get an answer from Wyze. Thanks ---
**Author:** ![superchi](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@superchi](https://forums.wyze.com/u/superchi)\ **Post date:** [November 17, 2020, 11:12pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/2 "2020-11-17T23:12:50Z")
Check Wyze support page ---
**Author:** ![WyzeJasonJ](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/wyzejasonj/32/8461_2.png) [@WyzeJasonJ](https://forums.wyze.com/u/WyzeJasonJ)\ **Post date:** [November 17, 2020, 11:17pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/3 "2020-11-17T23:17:55Z")
@Jagi Any support info that is currently released can be found [here.](https://support.wyzecam.com/hc/en-us/categories/360004538771-Wyze-Sprinkler-Controller) [https://support.wyzecam.com/hc/en-us/categories/360004538771-Wyze-Sprinkler-Controller](https://support.wyzecam.com/hc/en-us/categories/360004538771-Wyze-Sprinkler-Controller) ---
**Author:** ![Jagi](https://avatars.discourse-cdn.com/v4/letter/j/a8b319/32.png) [@Jagi](https://forums.wyze.com/u/Jagi)\ **Post date:** [November 17, 2020, 11:39pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/4 "2020-11-17T23:39:59Z")
Thank you Jason but I already went through that. I would like to see how to actually replace my present controller when I receive the Wyze controller. Diagrams, videos, or PDF/Docx. ---
**Author:** ![WyzeJasonJ](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/wyzejasonj/32/8461_2.png) [@WyzeJasonJ](https://forums.wyze.com/u/WyzeJasonJ)\ **Post date:** [November 17, 2020, 11:54pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/5 "2020-11-17T23:54:36Z")
I will bookmark this thread and as soon as I know of one being available I will link to it here. \*\*Note: I do not work for Wyze and am just a user that volunteers a bit of time so until the release it I wont have it either ---
**Author:** ![Jagi](https://avatars.discourse-cdn.com/v4/letter/j/a8b319/32.png) [@Jagi](https://forums.wyze.com/u/Jagi)\ **Post date:** [November 18, 2020, 12:06am UTC](https://forums.wyze.com/t/sprinkler-controller/142942/6 "2020-11-18T00:06:04Z")
Thank you, Jason. Stay safe. ---
**Author:** ![amorris101](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@amorris101](https://forums.wyze.com/u/amorris101)\ **Post date:** [November 18, 2020, 4:49pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/7 "2020-11-18T16:49:27Z")
Is there a wiring diagram available? Specifically I’d like to see that there are separate terminals for a master valve. I don’t use a master valve with my current system but I take the 24 Volts off of the Master Valve terminals to drive a relay which provides on/off status of the irrigation controller via my home automation system. In the future I will likely use the 24 volts off of the master valve terminals to integrate into an auto shutoff system for my water mains. Therefore I need the 24 volts from the master valve terminals. ---
**Author:** ![Ztup](https://avatars.discourse-cdn.com/v4/letter/z/50afbb/32.png) [@Ztup](https://forums.wyze.com/u/Ztup)\ **Post date:** [November 18, 2020, 8:26pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/8 "2020-11-18T20:26:22Z")
I did see in the photos on the website the master valve has separate terminals. ---
**Author:** ![dellinger31](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@dellinger31](https://forums.wyze.com/u/dellinger31)\ **Post date:** [November 18, 2020, 11:22pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/9 "2020-11-18T23:22:53Z")
I’m glad to see Wyze develop a sprinkler product but please offer more Zones. 8 up to 16 zones are the standard from other companies and should cover most homes. Thanks. DD ---
**Author:** ![amorris101](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@amorris101](https://forums.wyze.com/u/amorris101)\ **Post date:** [November 18, 2020, 11:42pm UTC](https://forums.wyze.com/t/sprinkler-controller/142942/10 "2020-11-18T23:42:58Z")
Can you post the link that shows the photos that show the terminals that are identified as Master Valve? I looked on the web site and I didn’t see anything that specific. Thanks.