# Sprinkler Controller Wiring

**URL:** <https://forums.wyze.com/t/sprinkler-controller-wiring/174272>\
**Category:** Home\
**Tags:** important, support, not-platform-specific\
**Created:** [April 10, 2021, 1:49pm UTC](https://forums.wyze.com/t/sprinkler-controller-wiring/174272 "2021-04-10T13:49:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jpe](https://avatars.discourse-cdn.com/v4/letter/j/6a8cbe/32.png) [@jpe](https://forums.wyze.com/u/jpe)\
**Post date:** [April 10, 2021, 1:49pm UTC](https://forums.wyze.com/t/sprinkler-controller-wiring/174272/1 "2021-04-10T13:49:35Z")

</div>

Where do the red and white wires from a pump start relay go on the wyze sprinkler controller?

---

<div class="post-metadata">

**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\
**Post date:** [April 11, 2021, 1:55am UTC](https://forums.wyze.com/t/sprinkler-controller-wiring/174272/2 "2021-04-11T01:55:30Z")

</div>

Welcome to the Wyze community @jpe!  
The app should show you how to wire the controller during setup. Does it not show this step? I don’t have experience with that type of wiring so unfortunately I can’t answer any further.

---

<div class="post-metadata">

**Author:** ![FromWyomings](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/fromwyomings/32/40685_2.png) [@FromWyomings](https://forums.wyze.com/u/FromWyomings)\
**Post date:** [May 14, 2021, 2:07pm UTC](https://forums.wyze.com/t/sprinkler-controller-wiring/174272/3 "2021-05-14T14:07:08Z")

</div>

They are the C and M tabs, the two white ones on the left. There’s another C tab on the right; those C tabs are the same, since the sprinkler wires also have a common line that needs to go to a C tab.

\ ***C** ontrol, **M** aster, is what I think they stand for. Red/M, White/C is how I would set it up first.
