# September update bricked my Wyze Cam Pan **URL:** \ **Category:** Cameras\ **Tags:** iphone-ipad\ **Created:** [October 12, 2020, 10:20am UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718 "2020-10-12T10:20:21Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![ChristophS](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/christophs/32/26869_2.png) [@ChristophS](https://forums.wyze.com/u/ChristophS)\ **Post date:** [October 12, 2020, 10:20am UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718/1 "2020-10-12T10:20:21Z")
Hi, What a joke with this September update. It bricked every single one of my devices. I had to manually install the October firmware via micro SD card to get these devices back again. However, my Wyze Cam Pan does not want to come back from death. I copied version 4.10.6.193 to the SD card and renamed it to demo.bin as per instructions nd did the reboot and reset. Nothing. The cam shows the blue colour before it goes back to blinking yellow but it won’t connect to my wireless network when I go through the set up process again. Help please! ---
**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\ **Post date:** [October 12, 2020, 12:20pm UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718/2 "2020-10-12T12:20:06Z")
Welcome to the Wyze community @ChristophS! You can flash the firmware to a previous version. This will need to be done to **each camera affected.** [https://support.wyzecam.com/hc/en-us/search/click?data=BAh7CjoHaWRsKwg3k4zTUwA6CXR5cGVJIgxhcnRpY2xlBjoGRVQ6CHVybEkiXmh0dHBzOi8vc3VwcG9ydC53eXplY2FtLmNvbS9oYy9lbi11cy9hcnRpY2xlcy8zNjAwMzE0OTA4NzEtSG93LXRvLWZsYXNoLWZpcm13YXJlLW1hbnVhbGx5BjsHVDoOc2VhcmNoX2lkSSIpZjhjMzBiOWUtOTA0ZS00MTRkLWJmNTYtYmUxNWEyZTY1YWM4BjsHRjoJcmFua2kG--6fd9b2df10aef692532fae865c4caf97332bfc50](https://support.wyzecam.com/hc/en-us/search/click?data=BAh7CjoHaWRsKwg3k4zTUwA6CXR5cGVJIgxhcnRpY2xlBjoGRVQ6CHVybEkiXmh0dHBzOi8vc3VwcG9ydC53eXplY2FtLmNvbS9oYy9lbi11cy9hcnRpY2xlcy8zNjAwMzE0OTA4NzEtSG93LXRvLWZsYXNoLWZpcm13YXJlLW1hbnVhbGx5BjsHVDoOc2VhcmNoX2lkSSIpZjhjMzBiOWUtOTA0ZS00MTRkLWJmNTYtYmUxNWEyZTY1YWM4BjsHRjoJcmFua2kG--6fd9b2df10aef692532fae865c4caf97332bfc50) This _should_ work as a _temporary_ fix. And the camera will load the latest firmware next time you update. **I’d recommend that you take a look at the #news section before updating, to see is anyone else has issues.** ---
**Author:** ![ChristophS](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/christophs/32/26869_2.png) [@ChristophS](https://forums.wyze.com/u/ChristophS)\ **Post date:** [October 12, 2020, 9:51pm UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718/3 "2020-10-12T21:51:57Z")
I did all that as mentioned above… It worked for all my devices except for the Wyze Cam Pan. I took version **[4.10.6.193](https://download.wyzecam.com/firmware/pan/demo_4.10.6.193.bin.zip) (October 5, 2020)** and copied it to the SD card and renamed the file to demo.bin. I then reset the device, waited for the blue/yellow lights and started the set up a few minutes later. This is what your procedure says and I followed but this didn’t help. ---
**Author:** ![Brlepage](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/brlepage/32/21184_2.png) [@Brlepage](https://forums.wyze.com/u/Brlepage)\ **Post date:** [October 13, 2020, 12:51am UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718/4 "2020-10-13T00:51:56Z")
If you have tried flashing the firmware and a factory reset, you may need to contact support: [https://support.wyzecam.com/hc/en-us](https://support.wyzecam.com/hc/en-us) 1 (844) 999-3226 or (206) 339-9646 **Available Monday - Friday 5 am - 6 pm PT and Saturday 8 am - 4 pm PT** ---
**Author:** ![Omgitstony](https://sea2.discourse-cdn.com/wyze/user_avatar/forums.wyze.com/omgitstony/32/7449_2.png) [@Omgitstony](https://forums.wyze.com/u/Omgitstony)\ **Post date:** [October 13, 2020, 1:03am UTC](https://forums.wyze.com/t/september-update-bricked-my-wyze-cam-pan/135718/5 "2020-10-13T01:03:56Z")
Check out this thread to see if your pan has an issue like mentioned in the thread. > [@Can't flash firmware to Cam Pan](https://forums.wyze.com/t/cant-flash-firmware-to-cam-pan/95238): > > I just received a cam pan this weekend and I set it up including the app updating to the cam to the latest firmware. My intent was to use RTSP for use with another software that I have outdoor cams setup with. I started trying to update the firmware using the manual method and have not been able to do so. I talked with support and did not end up getting a resolution. I decided to try to roll the firmware back to a different version and have been unable to get the firmware version to change at …